No-Drill front license mount for 348 & 355 | FerrariChat

No-Drill front license mount for 348 & 355

Discussion in '348/355' started by Carbonio, Sep 6, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 2
  1. Carbonio

    Carbonio Formula 3

    Dec 1, 2009
    1,142
    #1 Carbonio, Sep 6, 2016
    Last edited by a moderator: Sep 7, 2017
    Fellow F-Chatters. As some of you may have seen we have been releasing no-drill front license plate mounts for several Ferrari models and now we turn our attention to the 348 & 355 crowd. On both of these models fitting a front license plate is a real pain and normally involves drilling or some kind of home made rig to keep your car legal.

    We here at Carbonio have come up with an efficient solution that allows you to install and remove your plate in seconds. This setup has proven to be very popular and gives you the following advantages:

    - Quick on and off for car shows (to maintain your privacy when people take pictures), when washing to gain access, or for keeping the front end looking clean when at home for generalized staring and admiration.

    - For those willing to test their luck with the law it is a great road side 'fix' that will most often avoid a ticket. 'Sorry officer I was just coming back from a car show and forgot to put the plate back on'

    - Does zero damage and leaves zero trace when removed.

    - Adjustable in distance and angle to allow for a personalized fine tuning of your plate position.

    - Works with all international plates and adheres to international road rules making it a totally global solution.

    More pics and online ordering available at:

    Carbonio Performance - License Plate Mounts

    Of course here are some pics:
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    ShineKen likes this.
  2. Carbonio

    Carbonio Formula 3

    Dec 1, 2009
    1,142
    #2 Carbonio, Sep 6, 2016
    For those wanting more info here is a video outlining the features and installation:

    [ame]http://www.youtube.com/watch?v=1gfvWasNIxY[/ame]
     
  3. ShineKen

    ShineKen F1 World Champ
    Silver Subscribed

    Aug 3, 2007
    16,679
    Southern California
    Full Name:
    Nostradamus
    #3 ShineKen, Sep 6, 2016
    That's pretty neat!
     
  4. brent Lachelt

    brent Lachelt Formula 3
    Silver Subscribed

    Dec 6, 2003
    1,828
    Brownsburg, INDIANA
    Full Name:
    Brent R.Lachelt
    #4 brent Lachelt, Sep 6, 2016
    Really cool!! Would love to see what a US plate looks like on a 348.
     
  5. jimmym

    jimmym Formula 3

    Sep 30, 2008
    1,967
    Northeast U.S.
    Full Name:
    Jim
    #5 jimmym, Sep 7, 2016
    Very nice product.
     
  6. Carbonio

    Carbonio Formula 3

    Dec 1, 2009
    1,142
    #6 Carbonio, Sep 8, 2016
    Thank you for the positive comments guys. 'Neat' is the most common description we are getting on these and it not only makes the car look neat but is neat in its operation.

    Glen sorry I don't have a 348 picture to share but we'd be more than happy to have your car as a 348 model if you like :D
     
  7. SoCal1

    SoCal1 F1 Veteran
    Owner

    Jun 14, 2011
    8,571
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee
    #7 SoCal1, Sep 8, 2016
    Last edited by a moderator: Sep 7, 2017
  8. Carbonio

    Carbonio Formula 3

    Dec 1, 2009
    1,142
    #8 Carbonio, Sep 8, 2016
    Looks like someone needs a buy 2 get 1 free deal :)
     
  9. marioz

    marioz Formula 3

    Nov 21, 2003
    2,007
    Cedar Mills,Ontario
    Full Name:
    Mario
    #9 marioz, Sep 10, 2016
    Rob my car looks great in those photos!! I have my plates on car now & it really does the job. Now I can drive to a car show & remove plates in 10 seconds & display car the way it was designed for.

    Thanks again
     
  10. cf355

    cf355 F1 Rookie

    Feb 28, 2005
    4,208
    Full Name:
    chris
    #10 cf355, Sep 10, 2016
    very nice plate holder solution
     
  11. surfwolf

    surfwolf Formula 3
    Silver Subscribed

    Oct 14, 2012
    1,611
    Bethany, OR
    Full Name:
    Michael Wolfe
    #11 surfwolf, Sep 10, 2016
    I ordered one today for my 95 348 spider & will post pictures after install.
     
  12. Hubs348

    Hubs348 Karting

    May 9, 2013
    173
    Thousand Oaks, CA
    Full Name:
    Brian
    #12 Hubs348, Feb 18, 2017
    I ordered one today for my 94 348 Spider. A decision aided by a fix-it ticket for no front plate! I will post a picture after its installed. Neat solution. May need another for the Testarossa.
     
  13. Hubs348

    Hubs348 Karting

    May 9, 2013
    173
    Thousand Oaks, CA
    Full Name:
    Brian
    #13 Hubs348, Mar 6, 2017
    Last edited by a moderator: Sep 7, 2017
    Here's the plate holder on the front of my 94 348 Spider. I mounted the plate as low as possible without modification. It covers the cavallino badge's lower limbs a bit and sticks out a little farther than I would like. It is really easy to take on and off, is well made, and very gentle on the finishes. Just wish it was an inch lower.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  14. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,560
    Ontario, Canada
    Full Name:
    Mike
    #14 AceMaster, Mar 6, 2017
    6 months later, still not installed?
     
  15. Carbonio

    Carbonio Formula 3

    Dec 1, 2009
    1,142
    #15 Carbonio, Mar 15, 2017
    Thank you for the images and feedback Brian. We have actually been signing a number of Ferrari dealers as re-sellers for our plate brackets and they are very popular with the 'keep it original' crowd as they go on and off with no damage of any kind.
     
  16. marioz

    marioz Formula 3

    Nov 21, 2003
    2,007
    Cedar Mills,Ontario
    Full Name:
    Mario
    #16 marioz, Mar 30, 2017
    Last edited by a moderator: Sep 7, 2017
  17. cf355

    cf355 F1 Rookie

    Feb 28, 2005
    4,208
    Full Name:
    chris
    #17 cf355, Mar 30, 2017
    Looks great :) .....and the position does not mess with the front ground effects
     
  18. Carbonio

    Carbonio Formula 3

    Dec 1, 2009
    1,142
    #18 Carbonio, Mar 31, 2017
    Thanks for posting photos Mario. Your license plate should act as an inspiration to all Ferrari owners.
     
  19. 4rePhill

    4rePhill F1 Veteran

    Oct 18, 2009
    8,179
    Worcester, England
    Full Name:
    Phill J
    #19 4rePhill, Apr 1, 2017
    Last edited by a moderator: Sep 7, 2017
    All Ferrari owners? :confused:

    How will these photo's act as an inspiration to Ferrari owners who are not required to run a front plate, or those from other Countries whose required front plate already fits the car without the need for these brackets?

    In the UK for example, a legally required standard size front number plate fits perfectly onto the front spoiler of a 348:
    Image Unavailable, Please Login
     
  20. bjwhite

    bjwhite F1 Rookie

    Mar 17, 2006
    4,686
    Seattle, WA
    Full Name:
    Brian White
    #20 bjwhite, Apr 1, 2017
    Yeah but your steering wheel is on the wrong side....
     
  21. Ira Schwartz

    Ira Schwartz Formula 3
    Silver Subscribed

    May 20, 2003
    1,961
    Brooklandville, MD
    Full Name:
    Ira Schwartz
    #21 Ira Schwartz, Apr 1, 2017
    I think he was referring to the number: "2BDRIVEN", as in "Ferraris are meant to be driven".
     
  22. marioz

    marioz Formula 3

    Nov 21, 2003
    2,007
    Cedar Mills,Ontario
    Full Name:
    Mario
    #22 marioz, Apr 1, 2017
    Exactly what he meant.
     
  23. Carbonio

    Carbonio Formula 3

    Dec 1, 2009
    1,142
    #23 Carbonio, Jun 5, 2017
    Mario your 355 gets more mileage than any I have ever seen. I even spotted you at the gas station just south of Caledon on Saturday :)
     
  24. marioz

    marioz Formula 3

    Nov 21, 2003
    2,007
    Cedar Mills,Ontario
    Full Name:
    Mario
    #24 marioz, Jun 13, 2017
    That's the part I don't like---having to fill it up.
     
  25. Carbonio

    Carbonio Formula 3

    Dec 1, 2009
    1,142
    #25 Carbonio, Nov 7, 2017
    These plate mounts have been very popular and are being gobbled up by Ferrari dealers in areas where front license plates are required. In stock and ready to ship :)
     
Page 1 of 2

Share This Page