Hi, can you guys help me identify this plugs? I'm trying to identify the problem with my drivers side light not poping out. The fuse was burned but replaced with a new one and still won't work maybe you guys can suggest more troubleshooting this... Image Unavailable, Please Login
I found this thread using the forum search function, Ray http://www.ferrarichat.com/forum/348-355-sponsored-bradan/515925-light-wont-raise.html Maybe a lubrication problem or a motor contact problem. In the wiring diagrams, there also seems to be some limit switches. If these turn off the motors at the endstops, I wonder if they are working properly. Cheers
does the motor react when you start turning on the manual knob behind it? When you are half way, if the motor is functional, it will suddenly take over and close the light again.
So the motor spins the knob (indeed watch your fingers), but the light pod does not move down again? Sounds like the connection between the pod and the motor is loose. If you pop the hood, and look next to the light pod, you will see the connection levers. It is secured to the motor shaft with a 10 mm nut, which should be nyloc (nylon plastic inside, to prevent coming loose from the motor shaft). I guess that nut is a bit loose. Try tighten it carefully. But first turn the knob so the light pod is in the same position again as when you started (closed that is)