Friends: http://www.ferrarichat.com/forum/ferrari-parts-collectibles/444930-ferrari-360-hre-19-inch-wheels-456-550-575-a.html I am offering a set of HRE wheels for the Ferrari 360 on eBay. Ferrari 360 HRE Wheels ? 19 inch 430 458 456 550 575 No Reserve | eBay I usually hang out in the 456/550/575 forum, so I don't drop by here that often. You will see, however, that I am a ROSSA member. http://www.ferrarichat.com/forum/ferrari-discussion-not-model-specific/292029-why-i-bought-ferrari.html If one of you would like to advise me about the Bolt Circle, and the fitment, I would appreciate that ! If you win the NO - RESERVE auction, and identify yourself as an FChat member, I will arrange a discount. Cheers, Scott
Scott- If they came off a 360 or 65 deg V12, the bolt circles are identical at 5x108mm. You need to measure the front width because there would not be much of a market for 7" front wheels. They are likely 7.5-8".
Better information: I called HRE (760) 598 - 1960, and gave TITO the HRE code = F 51594, on the back of the wheel. Tito says: 1) Made for Ferrari 360 2) Bolt Circle = 5 x 108mm 3) Fronts are 19 inch by 8.5 inch with +28 offset 4) Rears are 19 inch by 11.0 inch with +28 offset 5) Hub bore = 67.1mm HRE will examine these wheels, and diagnose ANY problems. Repairs, buffing, and change of color(s) to be paid by the customer.
Friends: 28 hours left on this auction. Not well stated above, but HRE will examine their wheels FOR FREE. They check for any defect; including but not limited to out-of-round, "Hop," dents, side movement, loose bolts, etc. If you need repairs, they can perform the repairs, and can also change finish: Polish, matte finish, colors, change width, etc. You pay for ONLY the repairs and changes. Scott
Hi Scott I just received a response from engineering. It looks like the fronts work no problem, however, the rears are a little off. Since this fitment is setup to utilize the maximum fitment the front will sit pretty flush with the fender, but the rears will be inboard about a half inch. The 360 setup is 19x11.0 ET28, I show our standard fitment for the 456 is a 19x11.0 ET13. You would need a 15mm spacer to make them sit relative to the front. Ive included our Service Manager onto this email. If you decide to do the swap, he can assist with setting you up with a return number. Tito
