Brake Upgrade Options for 360/430 (Non Scu)

RacingBrake offers a complete brake upgrade and replacement option; including replacement rotor rings 328/330/355mm re-use OE hats (w/new hardware) 360/430

Ferrari Two Piece Rotors

For Modena:

Front & Rear: http://www.racingbrake.com/RB-Two-piece-Rotor-Kit-for-Ferrari-360-Modena-36-p/fer-irk-03.htm


360 CS (Available both CCM and Iron Replacement)

Front: Two-piece Rotor - Ferrari 360 Challenge Stradale / F430 (Iron Repl.)

Rear: IronTwo-piece rotor replacement (Open Slot) - Ferrari 350x34mm Rear

We are also developing a complete car kit (with RB calipers) for 360/430 (non Scru), available both CCM or Iron kit and the rotors are interchangeable with 360CS (380x34 front and 350x34 rear):

Front: 380x34mm 6-piston BBK
Rear: 380x30mm 4-piston BBK

Below picture showing the emergency brake mounts to RB rear OE replacement two piece rotor.

Since 350mm is the largest Ferrari rear rotors, so our project is to develop a bracket to move the hand brake up allowing for 380/390mm rear rotors, which is what most of the super-muscle cars' average sizes today.

We look forward to hearing from you.

Thank you.

Warren-RB
Image Unavailable, Please Login

 

Front 380mm BBK with RB center mount design light weight track duty high performance rotors and RB 6-piston calipers:

Item link and wheel fitment chart will be posted shortly.
Image Unavailable, Please Login

 

The front kit will be a 6-piston kit with 380x34mm - same size and offset as factory's CCM rotors or the complete kit as system upgrade.

The kit is ideal also for all models F430/F360 (w/low spindle) except Scuderia which has a higher spindle that offer a 400x34mm kit replacing factory's 398x36 CCM.

The rear can be 350x34mm rotor as rear CCM, or oversize to 380x30mm.