Installation of sliding window rubber seals | FerrariChat

Installation of sliding window rubber seals

Discussion in '365 GT4 2+2/400/412' started by Cazna, Nov 2, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Cazna

    Cazna Karting

    Aug 6, 2013
    71
    Sydney, Australia
    Full Name:
    Robert
    #1 Cazna, Nov 2, 2015
    Can anyone suggest or recommend the best way to install the sliding window profiled seals on the two front doors of a 365 GT4 2+2?
    Is there a You Tube or similar site I can see what is best?
    I've secured the proper profiled rubbers but need help on the install.
    Thanks in advance.
     
  2. theobordeaux

    theobordeaux Formula Junior

    Jan 13, 2011
    482
    Bordeaux (France)
    Full Name:
    Theodore
    #2 theobordeaux, Nov 2, 2015
    Hi Robert, drag them into the slot reserved for them is difficult. I solved the problem by cutting into two slides. First I introduced the lower one inside the door and then the top one. the door panels must be removed.

    Theodore
     
  3. Ak Jim

    Ak Jim F1 Veteran
    Owner Rossa Subscribed

    Dec 23, 2007
    8,498
    North Pole AK
    #3 Ak Jim, Nov 2, 2015
    Where did you get these?
     
  4. Cazna

    Cazna Karting

    Aug 6, 2013
    71
    Sydney, Australia
    Full Name:
    Robert
    #4 Cazna, Nov 2, 2015
    Hi Theo, A local parts supplier in Sydney has them and well as Lyle Tanner in USA.
    Are you after both sides as I may be able to supply a spare set I have?
     
  5. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #5 bundas, Nov 2, 2015
    I sure need those seals. that is the only thing I have not found. please post a photo of what you are using and a part number. thanks
     
  6. theobordeaux

    theobordeaux Formula Junior

    Jan 13, 2011
    482
    Bordeaux (France)
    Full Name:
    Theodore
    #6 theobordeaux, Nov 3, 2015
    "Are you after both sides as I may be able to supply a spare set I have?"
    Sorrrry Robert, I don't undestand that you say
     
  7. willrace

    willrace Three Time F1 World Champ
    Owner Rossa Subscribed

    Oct 21, 2006
    32,908
    North Tay-has
    Full Name:
    Kurt
    #7 willrace, Nov 3, 2015
    Last edited by a moderator: Sep 7, 2017
    Are these the seals on the outside of the window frame that seat against the door opening, or those inside the window frame in which the window slides?
    Pic of the first (which is what I'm trying to find for both 400GT and similar for the 512BBi):
    Image Unavailable, Please Login
     
  8. bundas

    bundas F1 Veteran
    Owner

    Dec 31, 2005
    7,090
    lexington ky usa
    Full Name:
    mitchell barnes
    #8 bundas, Nov 3, 2015
    Last edited by a moderator: Sep 7, 2017
  9. willrace

    willrace Three Time F1 World Champ
    Owner Rossa Subscribed

    Oct 21, 2006
    32,908
    North Tay-has
    Full Name:
    Kurt
    #9 willrace, Nov 3, 2015
    Mitchell, that looks about like what I need.

    Not sure that's what the original post was about, but it might be. Cazna, could you confirm one way or the other, please?
     
  10. SouthJersey400i

    SouthJersey400i Formula 3

    Mar 14, 2007
    1,605
    Romulus, NY (Finger Lakes)
    Full Name:
    Ken Battle
    #10 SouthJersey400i, Nov 3, 2015
    He sells all of these rubber parts; gets them from Italy. Quality is good and priced reasonably, especially those that he can buy a continuous length and sell by the foot.
    Ken
     

Share This Page