400i jack stand location | FerrariChat

400i jack stand location

Discussion in '365 GT4 2+2/400/412' started by jes-13, Dec 11, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jes-13

    jes-13 Karting

    Jun 9, 2006
    56
    California
    Full Name:
    John
    #1 jes-13, Dec 11, 2016
    I assume that a good place for jack stands on a 400i, that won't hurt the car or me, is the large tube frame, near suspension attachment points...
     
  2. ricar116

    ricar116 Formula Junior

    Aug 2, 2005
    409
    Bolivar, Missouri
    Full Name:
    Rick Carr
    #2 ricar116, Dec 11, 2016
    That will work. I just put somthing on the handstands not to gouge frame. Right or wrong I use crossmember in front of pan to lft front and rear diff to lift rear. As a matter of fact did it today. Good luck.
     
  3. GT Jones

    GT Jones Formula Junior

    Oct 15, 2011
    669
    Lincoln, MA
    Full Name:
    Christian J
    #3 GT Jones, Dec 11, 2016
    Old hockey pucks work well as a pad
     
  4. markcF355

    markcF355 F1 Rookie
    Rossa Subscribed

    Jun 6, 2004
    3,493
    Schmeckelstan
    Full Name:
    Mark
    #4 markcF355, Dec 15, 2016
    Not sure I'd use the rear diff because you'd be pulling at the mounts. I put a flat 2x4 across the little points at the end of the frame rails. Just watch out for the fuel box in front of the cross member.
     

Share This Page