Cleaning Stains from 365 / 400 Carburetors | FerrariChat

Cleaning Stains from 365 / 400 Carburetors

Discussion in '365 GT4 2+2/400/412' started by 15765, Apr 20, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 15765

    15765 Formula Junior

    May 14, 2012
    302
    Las Vegas NV
    Full Name:
    Chuck King
    #1 15765, Apr 20, 2017
    What is the best way to clean the stains and oxidation from the outside of Weber Carbs on a 365 / 400 to bring them back to show condition.

    Chuck
     
  2. jmaienza

    jmaienza Formula Junior
    Rossa Subscribed

    Jan 8, 2009
    608
    Massachusetts
    Full Name:
    Joe
    #2 jmaienza, Apr 21, 2017
    Last edited by a moderator: Sep 7, 2017
    I used Simple Green Aviation formula diluted 50/50 with distilled water. Let them soak overnight or longer and clean with a soft toothbrush. Heavily soiled areas can be cleaned using a more concentrated formula. Let dry and blow out with compressed air.

    If you are rebuilding them, sealed throttle plate shaft bearings are available from Pierce Manifolds in California. The old design will let air in after the grease thins and can cause vacuum leaks.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  3. Newman

    Newman F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 26, 2001
    14,148
    Canada
    Full Name:
    Newman
    #3 Newman, Apr 21, 2017
    Be careful to not remove the dull-green hue from the castings if its still there.
     

Share This Page