Replacing my clutch on my 599, what is needed? | FerrariChat

Replacing my clutch on my 599, what is needed?

Discussion in '612/599' started by AD-maranello, Nov 26, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. AD-maranello

    AD-maranello Rookie

    May 14, 2008
    27
    Abu dhabi, UAE
    Full Name:
    Rashed Rashed
    #1 AD-maranello, Nov 26, 2014
    Good day all,

    Am planning to change my clutch soon on my 2008 599, i was wondering if i should only order the clutch only or is there any other spare parts i should consider along to be replaced. Please advice.
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,313
    South East
    Full Name:
    Jimmie
    #2 greyboxer, Nov 26, 2014
  3. qwertstnbir

    qwertstnbir Formula 3

    Jul 14, 2013
    1,620
    #3 qwertstnbir, Nov 26, 2014
    What milage have your 599?
     
  4. brian.s

    brian.s F1 Rookie
    Professional Ferrari Technician

    Nov 3, 2003
    3,806
    Midwest
    Full Name:
    Brian
    #4 brian.s, Nov 26, 2014
    Typically I recommend at least complete clutch, TO assy and position sensor. This is most definitely a "while you're there" scenario.
     
  5. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,082
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #5 tazandjan, Nov 26, 2014
    Possibly pilot bearing, too, which is relatively inexpensive.
     
  6. ddonzella

    ddonzella Karting

    Jun 2, 2014
    104
    Davie
    #6 ddonzella, Nov 26, 2014
    I asked this question some months ago on the ALGAR tech section and was told you need an SD3 analyzer for before, during and after the clutch install thereby not making the job a DIY event. Just my .02 cents. I would change all moving components
    while it was apart though!
     
  7. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,082
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #7 tazandjan, Nov 26, 2014
    Affirmative, if you change your own clutch, put it on a flatbed as soon as complete and take it to a tech with an SD/Leonardo.
     

Share This Page