Are Andy and Alex still the names for PPI in Scottsdale?

**dogdoc97** · #1 04-28-2012, 05:09 PM

Found the names on an archive search, dogdoc

**Buckynsparty** · #2 04-28-2012, 06:12 PM

Just had Andy Falbo do some significant work on my 360 - engine & tranny out. He was great to work with - highly recommended.

**Under PSI** · #3 04-28-2012, 07:20 PM

Cannot say enough good things about Andy.

**dogdoc97** · #4 04-28-2012, 09:15 PM

or another name they use, Network Auto; they have a 550 out there I am looking at, thanks, dog

agup48 · #5 04-28-2012, 09:22 PM

Quote:

Originally Posted by dogdoc97

or another name they use, Network Auto; they have a 550 out there I am looking at, thanks, dog

I can't even access their website, I did a WhoIs search as well and the website still won't open and transfers me to some other Airpark Motorscars LLC, though it doesn't have a 550 in their inventory. I will say I've never heard the name, though I don't know many of the dealers around town.

Good luck on your purchase!

**dogdoc97** · #6 04-28-2012, 10:40 PM

The email for this guy says "airpart".... but the link for the reviews says "airpark"....I pulled a carfax and the car is clean ALTHOUGH it failed emissions twice in the past, is that a concern or not unusual for a F car? thanks, dog

**hmfic1** · #7 04-29-2012, 10:53 AM

had Alex do service and a few minor fixes on my 360, did a great job. Will go back to him for any other work on the car.

Ingenere · #8 04-29-2012, 10:36 PM

Quote:

Originally Posted by dogdoc97

The email for this guy says "airpart".... but the link for the reviews says "airpark"....I pulled a carfax and the car is clean ALTHOUGH it failed emissions twice in the past, is that a concern or not unusual for a F car? thanks, dog

I know just about every dealer in town and I've never heard of the one you are talking about. Do you have a link to the car?

As for Andy and Alex, you can't go wrong either way.

**Patek** · #9 04-30-2012, 09:36 AM

Hi ,
I was looking at the car, called them about 5 times. Seems the rear deck cover is pulling away, and the AC area is starting to get puffy. The man also said the carpet in the back was puffing up, don't know what $$$ it would take to re-do the whole thing. Front seat he said needed a re-dye. It is cheap, but not sure if there are monsters with other things. But I did talk to Andy last week. They charge $95 per hour to check it out. They told me about paint chips around the nose, and the back wheel is , I think needs a paint touch up, it was chipped, but just ask they seem straight up.

Sales Tax back in Ga. plus and the issue with all the shrinking, just starting, they say it will keep going. So when you do sell it you will have to do a few thousand in the interior, or the new buyers will beat you down on that part. That dash stuff really bugs me about these cars.
But super strong V12 is the good part.
Best,
John

**bill59** · #10 04-30-2012, 10:27 AM

I am an Andy fan. He just went completely thru a 55o and brought it back to life. He is getting mine hopefully this week. Bought it and in less than 50 miles I lost what I hope to be a coolant hose. The best part is that Andy is also an engineer. He understands that side and is quite knowledgeable about modifications to our cars. Bill

**Patek** · #11 04-30-2012, 10:37 AM

Bill, What would make the 550 not pass the emission test, this silver car failed twice.
Best,
John
I did talk to andy last week said you had just a hose problem, and would knock it out for you.

LamboRider · #12 02-12-2013, 09:48 AM

Andy Falbo's Ferrari Motor Service is hosting The Ferrari Club of America at the starting point for this Saturday's drive to Wickenburg on the backroads. Don't miss it!

FCA-DR- Feb. 16th Drive to Wickenburg

carlissimo · #13 02-12-2013, 08:37 PM

Alex has taken excellent care of my F-355 for the past 5 years. I recommend him highly.

**ferrariman1492** · #14 02-13-2013, 09:22 AM

Not to beat a dead horse (cavallino?) here, but Andy Falbo just did a major on my 308 and I was thrilled with the quality of work and fair prices. An all around good and honest guy, and I highly recommend.

**labcars** · #15 02-13-2013, 10:59 PM

Having used both........Andy all the way!!!

**rob4092xx** · #16 02-16-2013, 08:39 PM

Have met both and love em! I use Alex since he is closer to me and keeps all cars inside whether he is working on them or not. This is very important to me!

jimmyr · #17 02-22-2013, 09:08 PM

Andy Falbo is honest and knows his stuff. A good fabricator too. Good with the old V12 models also. Jim

**bgmix** · #18 02-23-2013, 06:58 AM

Quote:

Originally Posted by Ingenere

As for Andy and Alex, you can't go wrong either way.

+1 - They're both great, knowledgeable guys.