I asked the same thing a while ago. Heres the answer: --------- Do Oz spec 360 have precats in the headers ? No. Same spec as Euro. Or more accurately UK spec. I have a UK spec 360 and only differences between UK and AU are: * KPH and deg C on instruments where UK has MPH and deg F. * AU cars cigarete lighter switches with ignition and is not live at ign off where UK is perm live (This is an Australian ADR requirement for all new vehicles). * AU cars have a couple of extra heat shields in the engine bay over UK cars. Interestingly the local Ferrari dealer techs informed me that they remove these from AU cars as the actually trap more heat! * AU base spec vehicles have better "base" specification than standard UK spec (elec seats standard etc). You can check what market the car was made for by checking Vin. UK has a "C" and AU has a "D".
I've looked at a lot of ex UK 360"s recently and have found most of them have upgrades, Daytona electric seats, tubi exh, CS grills etc!.
mine must be pretty standard - only upgrades were stitching/piping and Challenge grilles back and front. Originally modular wheels were specified, but at some point in the car's life they were swapped for starfish. Would be great to come across a set of modulars at the right price to revert the car back to the original spec
Funny you said that... I looked at x5 of them before getting mine and they all have corrosions mainly with the clips in the engine bay. One even had a big rust bubble on the rim..
