Cleaning switch contacts | FerrariChat

Cleaning switch contacts

Discussion in 'Boxers/TR/M' started by ago car nut, Sep 16, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ago car nut

    ago car nut F1 Veteran
    Silver Subscribed

    Aug 29, 2008
    5,265
    Madison Ohio
    Full Name:
    David A.
    #1 ago car nut, Sep 16, 2014
    Last edited by a moderator: Sep 7, 2017
    This is a tech on cleaning my TR window and glove box switches. My glove box was intermittent. So I disassembled them and it now works perfect. So I did the same for the window lift switches. Take a small screwdriver and CAREFULLY pry open the sides to release the little tabs holding the switch together. Keep track how they go back together. Take the contacts and lightly sand with abrasive paper. Clean the pivot points on the switch also. Spray contact cleaner on them and reassemble.



    Ago
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     

Share This Page