90 Testarossa | FerrariChat

90 Testarossa

Discussion in 'Boxers/TR/M' started by 90TR, Nov 16, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 90TR

    90TR Formula Junior

    Nov 23, 2005
    274
    Celebration, FL
    Full Name:
    Bill
    Hi, For some reason I cannot find the torque specs in the book for the Clutch Pressure plate. Does anyone know the torque cycle and lbs for this? I assume it is the normal 2-3 times around with increasing pressure, just can't find this in the book.

    Also, is it 90w oil in the rear case...you know the one I forgot to drain and that spilled all over the floor when I separated the cases...ugh

    Thanks again, Bill
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,040
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    The pressure plate torque spec is on page M6 of the TR WSM.

    75W90 in the transfer case -- it's the same (shared) lubricant as in the gearbox, but you need to put a little manually into the transfer case to ensure it has lubrication at first use.

    PS do not put 17 pints into the transfer case -- it should say 0.17 pints
     
  3. godabitibi

    godabitibi F1 Veteran
    Silver Subscribed

    Jan 11, 2012
    6,252
    Papineauville, Quebec
    Full Name:
    Claude Laforest
    Personally I like to fill the entire transmission by the the transfer gear case. Easier to fill than the rear plug and it overflow in the diff anyway.
     
  4. Mr.Chairman

    Mr.Chairman F1 Rookie

    Mar 21, 2008
    2,987
    New Jersey
    Full Name:
    Robbie
  5. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    8,867
    southwest germany and thailand
    Full Name:
    romano schwabel
    but it takes always long time until you have all oil in :(
    I do the same :)
     

Share This Page