A/C condensor shield panel | FerrariChat

A/C condensor shield panel

Discussion in 'Boxers/TR/M' started by Chief20123, Nov 9, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Chief20123

    Chief20123 Karting

    Dec 22, 2012
    169
    Melbourne,Australia
    Full Name:
    Fred
    #1 Chief20123, Nov 9, 2016
    I'm currently restoring the front end and I've taken off the A/C condenser shield panel, which doesn't seem right. There is one hole for one of the bolts which is missing, so I think the original may have been broken and it was replaced. If anyone can take a photo of one (it's on the left side wheel arch in front of the wheel) that would confirm this......thx
     
  2. Chief20123

    Chief20123 Karting

    Dec 22, 2012
    169
    Melbourne,Australia
    Full Name:
    Fred
    #2 Chief20123, Nov 9, 2016
    that is for a 86 Testarossa!...
     
  3. 302Tim

    302Tim Formula 3

    Jul 2, 2011
    1,182
    Northern California
    Full Name:
    Tim
    #3 302Tim, Nov 9, 2016
    Last edited by a moderator: Sep 7, 2017
    Mine (1988) is attached with four bolts and one screw--the bolts are correct and although it seems out of place I believe the screw is also correct as I have seen it on at least one other TR
    Image Unavailable, Please Login
     
  4. Chief20123

    Chief20123 Karting

    Dec 22, 2012
    169
    Melbourne,Australia
    Full Name:
    Fred
    #4 Chief20123, Nov 10, 2016
    Last edited by a moderator: Sep 7, 2017
    Thank Tim, Mine has the same holes, but a little different, maybe the earlier models were different, (see attached ). Is your's made of metal?
    Image Unavailable, Please Login
     
  5. ago car nut

    ago car nut F1 Veteran
    Silver Subscribed

    Aug 29, 2008
    5,265
    Madison Ohio
    Full Name:
    David A.
    #5 ago car nut, Nov 10, 2016
    My 87 TR is as above with louvers.
     
  6. 302Tim

    302Tim Formula 3

    Jul 2, 2011
    1,182
    Northern California
    Full Name:
    Tim
    #6 302Tim, Nov 10, 2016
    No, mine is fiberglass with a metal grill
     
  7. Chief20123

    Chief20123 Karting

    Dec 22, 2012
    169
    Melbourne,Australia
    Full Name:
    Fred
    #7 Chief20123, Nov 10, 2016
    Mine's fiberglass as well, no metal grill. Maybe it was changed to metal grill with later models?
     

Share This Page