Tool roll Tr maybe 328 or 412 as well | FerrariChat

Tool roll Tr maybe 328 or 412 as well

Discussion in 'Ad Archives' started by guygowrie, Jul 18, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    #1 guygowrie, Jul 18, 2015
    Last edited by a moderator: Sep 7, 2017
    Excellent condition tool roll with tools. No slot for plug tool thus believe not for 308's and believe most likely for Tr's (not 512's), possibly 412's and also 328's.

    May be a Ferrari replacement as I cannot verify which car it's from.

    Pleather roll, no stains/tears. Slight corrosion inside one of the pop tabs

    Black screwdrivers with white Ferrari stencil. Very good condition with a few dots of rust that can be cleaned off.

    20 wrench has black stenciling
    18/19 has no brand, no stencil and just chrome vanadium
    17 & 15 are Kravm with Ferrari stamp
    13, 10 & 8mm have black Ferrari stenciling
    6 wrench has Kravm and Ferrari stamping

    Red handled pliers are Promax with white Ferrari stencil on both side

    $950 obo with shipping to lower 48
    Image Unavailable, Please Login
     
  2. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    #2 guygowrie, Jul 18, 2015
    Last edited by a moderator: Sep 7, 2017
  3. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    #3 guygowrie, Jul 18, 2015
    Last edited by a moderator: Sep 7, 2017
  4. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    #4 guygowrie, Jul 18, 2015
    Last edited by a moderator: Sep 7, 2017
  5. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    #5 guygowrie, Jul 18, 2015
    Last edited by a moderator: Sep 7, 2017
  6. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    #6 guygowrie, Jul 18, 2015
    Last edited by a moderator: Sep 7, 2017
  7. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    #7 guygowrie, Jul 18, 2015
    Last edited by a moderator: Sep 7, 2017
  8. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    ....and inviting offers
     
  9. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    Bruno (Nerofer) very kindly sent me the following comments on the tool roll I have for sale.

    It is most likely that it is a Ferrari replacement tool roll circa 2000-2010, rather than a period tool roll that would have been delivered the car from new. Bruno goes into the detail below and I included his message with his permission.

    It is still Ferrari, and appropriate for 308/328/TR maybe 400's/412's. I'm not sure how that affects concourse if thats what you are after.

    This certainly means the tool roll is worth less than a period original, but I feel it's already priced accordingly, HOWEVER, I remind I am open to offers!

    Thanks again to Bruno!

    hello Guy,

    Just for information: a few short lines to tell you that the tool roll you have for sale is not a "period correct" eighties tool roll.
    In fact, it is the "generic" replacement tool roll that the factory sent to those 308, 328, Testarossa owners that bought a new tool roll from the factory at the beginning of the 2000 - 2010 decade.
    It can be easily distinguished from the "real original" tool rolls from the eighties by its screwdrivers with "solid black" handles (originals are translucent deep dark red); the absence of the spark plug tool and its associated combination wrench for 308 and 328; and the mix of Kravm and Promax wrenches, whereas the original 1980's have all eight wrenches from "Kravm" only (being marked "Chrom vanadium Kravm" on relief on one side of the handle, Ferrari on the other)

    Rgds
     
  10. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    Open to offers
     
  11. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,143
    Houston, Texas
    Full Name:
    Bubba
    I would just point out, that per my understanding of the FCA judging rules, this would be totally acceptable as a "representation" of the OEM roll, for any 308/328.

    I would also argue it matches "better" than the period rolls!
    :D :D

    Maybe Robert Garvin, for his "new, reproduced" 308GT4??

    One could easily find the proper spark plug tool, for the year you need.
    Those did change, as the plug itself was updated.
     
  12. arcticlighting

    arcticlighting Karting

    Oct 5, 2007
    184
    Spokane, WA
    Full Name:
    Brian Chapman
    Sent pm on roll.

    Brian
     
  13. guygowrie

    guygowrie Formula 3

    Sep 19, 2011
    1,400
    ct
    Full Name:
    guy s
    Sold and shipped. thanks for the interest.

    Guy
     

Share This Page