Is there a wrong way to wire the brake switch? | FerrariChat

Is there a wrong way to wire the brake switch?

Discussion in 'Mondial' started by Rapalyea, Nov 9, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Rapalyea

    Rapalyea Formula 3

    Jun 18, 2013
    1,511
    Georgia Mountains US
    Full Name:
    David Rapalyea alias
    #1 Rapalyea, Nov 9, 2013
    What is the correct way to re-attach the four brake switch wires (two small and two large ones). If wired wrong what would happen?
     
  2. RichardAguinsky

    RichardAguinsky Formula Junior

    Nov 12, 2007
    478
    Palo Alto, Californi
    Full Name:
    Richard Aguinsky
    #2 RichardAguinsky, Nov 16, 2013
    I went through that same issue when I replaced my clutch master. As long as you plug back the two large with the two large and the two small with the two small, you should be fine.

    Make sure you test the brake lights if you removed the switch. They should turn on when you tap on the brake pedal and also that they are not on all the time.
     

Share This Page