© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Regarding the stumble i would indeed focus on the jets/carburettors. For the ignition system, just go with it and see where it leads to, you...
I use 123 ignition on some of my other cars as well and i'm totally happy with it. For the Dino on the other hand it's not a happy marriage. I...
I did mess around a lot with different curves, vacuum advance, dyno tests etc. etc. on a Dino engine. Also with a programmable 123-ignition with...
Yes the streetfire 5520 When you set the rev limit to the max. (9900RPM for V8 setup) it corresponds to 6600RPM for a V12. Which is exactly the...
MSD Streetfire unit. Cheap, small, reliable, not overkill, build in rev limiter, and with a bit of DIY it fit's inside an original Dinoplex AEC104...
Tacho will work fine with the MSD. No problem that it is only 8cyl, you can set the rev limit to 9900 for an 8cyl and that is equivalent to...
If you use an MSD6AL2 instead of an MSD6A, you do have the option for a Lumenition optical pickup. Because the 6AL2 has a white/blue wire for Hall...
Pull out the carbon pin in the middle of the distributor cap and you will find the screw.
Don't want to be the Devils advocate, but i think the cam lobes are also part of the problem. I've installed these new points on many...
It will work both, you can lock the original lobe shaft no problem. A rigid shaft is just more convenient.
This drive dog can be seriously hard to remove. Quite often you do need a big puller to get it off. If a lot of force is needed it will bend and...
What i've noticed with these Dino distributors is the following: -You always need to replace/repair the 'base cup' because the pins from the...
The distributors are almost always totally worn out, especially on Fiat Dino's that most of the times have more than 100.000km on them. I've...
Most important question is: does it have a 3-lobe cam or a 6-lobe cam inside the distributor. If it has a 6 lobe cam the second set of points are...
DCN14's were on early Fiat Dino 2 liter engines
It is in the trunk where your spare tire is. From underneath the car, remove a plastic cover and you'll find it. Beside that, change the fuel...
I made the warning labels (for both the dinoplex as for the distributor) myself, so yes the holes line up. And for the metal casings: I designed...
For people that consider switching to a programmable MSD, here some info that can make the conversion quite a bit easier for everyone. I've been...
Yes i can help you out. I can build something for you. Just send me a message. In the meantime i also made all the parts needed to convert the...
I would check the switch first. These bakelite switches are much more fragile than the older aluminum ones. I would say at least 50% chance...