© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Sorry I do not have that info. My 3500 build sheet also has the 430cm2 shown. This is an area measurement not volume. The total swept volume is...
The reason for the various cam to valve clearance numbers on the six cylinder engines is related to which set of cams are installed. Most of the...
The oil leaks on the 6 cylinder engines is usually caused by the old style head gasket, which is still the best in my opinion. It is very...
I think either would work. But which ever you use should be rebuilt so it really works as a crankshaft damper. The rubber needs to be new or...
I think the color was fairly common. I have owned three Mistrals in that original color
My opinion on the 4.9 crankshafts is they are not very well balanced. When I rebuilt my Khamsin engine I had the crank balanced as well as the...
I have a pretty good copy of Stan Bishop's artical if you need one for you website
Also do a compression test and leakdown before you start to see if you need to go any futher. I thought you also had a rear main leaking. If that...
You can measure the new cams with a dial indicator to get the profile and compare it with the original. The original cams could be worn but you...
It is based in So Cal but they usually have one event in Napa, one in Pismo and an auction preview in Monterey.
Ivan I was wrong with my comment that Power props could modify the wet system. The modification was done by Kinsler. I am getting the details now...
Power Props can modify the wet system to be dry type. SO if the system has been rebuilt by Power Props it may have been converted.
To see the possible misalignment of the water pump to the A/C pulley there is a hole on the other end of the bracket that drives the water pump...
I owned this Q port from 2014. It was sold to a person in New Hampshire in 2015. If you want more info on this car send me a email.
THe rear main is not replaceable with the engine in the car. You need to remove the crankshaft to replace it. Good time to replace rings and...
I have been using the Michelin Pilot X 600WR 16 on my 3500 for about 6 years and have been very happy with them. while this is labeled a 600 X 16...
FYI Hasselgren rebuilt my Bora engine 20 years ago and it has been flawless. I have driven the car over 30000 miles and on several long trips and...
Here is a picture showing the location of the clutch wires. THey come out at 90 degrees to the left side of the car. All of my 6 cylinder cars...
Great pictures Ivan. Mine looked just like the photo with the tan leather covered box on top of the drive shaft tunnel
I searched my pictures of my late Ghibli but could not find a picture of the tape player. I am sure it was a factory installation as it was...