© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
similar thing happened with Terry Myr here in michigan. Turns out he was cheaper than others because was he wasn't paying taxes! I'd be shocked if...
I wouldn’t drive it with a partially burned up cat. I’d investigate if something caused to get that way, like running too rich or too lean. Also...
I have the SRI fuse box with the high load currents off the main panel. I highly suggest any new testarossa owner to consider this improvement....
I did that too. I could feel the vibrations in my molars.
[MEDIA] Sounds great! Way too loud for normal use and you will need hearing protection inside the car.
Wow. Had no idea 512tr was so different. Thanks!
If you have no cats or precats I’d just pull the thermometer and plug the hole.
How did this fail? Can you post some pictures?
What’s the VIN?
https://www.flir.com/flir-one/ You can use a laser thermometer to see what your temps are in the cats. I bought this FLIR camera for my phone....
I’m a big proponent of always rebalancing the banks after messing with the engine. Follow the manual to a T. Using the manometer in the manual is...
I usually wait until mid April. The potholes are usually bad until then and the other cars throw stones at the car. but I drive my cars where I...
I enjoy wrenching on cars. I enjoy wrenching on my dream car. I enjoy helping other people wrench on their Testarossas too! The amount of help...
https://www.ebay.com/itm/156083332672?itmmeta=01HR3728WE2C8HAG5M28BE4P01&hash=item24574aa640:g:XhYAAOSw8FZl3JOd
There’s a guy on eBay parting out a testarossa. He’s very expensive, but I bought a spare tire leather strap from the car.
Hey Brian, would you be able to tell us what he did wrong? Never heard of a TR oil change going haywire besides stripping a drain plug.
Manual Scud is my dream car!
Oh. 1986 Testarossa. inside diameter needed is 23mm. Outside diameter needed is about 30mm. I can’t find the dimensions of any of these bushings...
Yes. Just pull the bell housing off. You don’t need to remove the clutch discs.
Old bushing is smushed into a pile of broken plastic and grease.