© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
You have a pm
I received the new sensor and installed it last night. Road test and all is good. I guess there is no way to tell if it failed due to water...
Thank you Brian, no wonder a simple ohm meter reading was of no help. I did order a replacement, hopefully I have it before the weekend. Gary
Yes, that is the part, got the wrong part number earlier. I am going to order the sensor. I have done a little more research and found that if the...
Regarding the connector, the only connector I found was the sensor to harness connector. Don't know about 348 models.
That makes sense. Lets face it the car is 15 years old. A lot of heat cycles, maybe coincidental but still failed. Agreed about the method buT I...
It is the sensor for the vehicle speed, left side of transmission, close to the left cv boot. Proper name is a pulse sensor, part number 14905.
I think the speed sensor has failed on my 98 355 F1. Yesterday took the car to my shop to clean the motor. Did the usual yearly cleaning...
Tried to search and could not find a cross reference for the speed sensor # 149095. If anyone knows of a replacement please let me know, thanks.
I seem to recall that cars with F1, the shift ECU records the mileage independent of the odometer reading. Is it true? If so, should give some...
My car has a challenge grille. Was ordered and delivered with the challenge grille. Was not the challenge grille an option? If it is an option,...
Is this car even legal to be driven on public roads? My concerns would be safety related. The bottles are not well secured. What about a rear end...
"It also comes with propane tanks for racing" How many propane tanks can you count?...
The 355 is one of my favourite models and at the time I was searching, the 355 was not allowed to be imported into Canada from the US. So I was...
I have a few T shirts and a couple of caps. I did not realize that some people do pay attention to the branding and some are not afraid to...
If the roads were free of stone chips from the winter I would have mine out now.
I did the engine out service last spring. The purpose for the service was that I had a noise from the front of the engine that I suspected was a...
This may be a simple question but can anyone help me find the main relay on my 355? This relay has 5 prongs with 2 power out connections and feeds...
Yes it does oscillate, most likely due to intake pulses, mine is reading slightly higher, between 5 and 6 inches. I just found your other thread...
Mine read about 5 inches as well. Seems way too low. I was expecting anywhere from 18 to 20 inches at idle, about 1050 rpm or so.