How many 355 guys need one of these from Daniel??? The new GS355RDC52 :) | FerrariChat

How many 355 guys need one of these from Daniel??? The new GS355RDC52 :)

Discussion in '348/355' started by gothspeed, Nov 24, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

?

How many will want one?

  1. Yes, definitely!

  2. Not now, but maybe later.

  3. No, I like the cluttered look ;).

Multiple votes are allowed.
Results are only viewable after voting.
  1. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    #1 gothspeed, Nov 24, 2009
    Last edited by a moderator: Sep 7, 2017
    Ok I just sent Daniel a few of the all new billet nero anodized 5.2 motronic 'Intake Resonator Delete Caps' ....... crafted in the gothspeed laboratory abyss ....... :cool: !!

    Here is quick briefing on why you need one of these ..... ;) ............

    Of the resonator caps that have been installed ....... I have gotten reports of better off idle acceleration crispness . Which makes sense because the billet cap uses a monster o-ring and is precision made to make a positive seal in that leak critical area (post MAF). If there is a leak there .... the MAF metering accuracy to the ECU is compromised during the idle/acceleration transition. The factory plastic resonator interface can warp with heat and that tiny factory o-ring may not compensate for some gaps ............... :eek:

    Sumation .......... the GS355RDC52 billet resonator delete cap not only cleans up the looks of the 355's engine compartment but also ensures a leak-free interface for more accurate off idle MAF metering ..... removing the factory resonator also lends to a discernably throatier sound ..... :)

    Daniel should have them in a few days .............. :)!

    Note: The pics of the nero one is the final version, the silver cap pics are to illustrate where it goes.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. geno355

    geno355 Karting

    Jul 5, 2007
    225
    Winchester, KY
    Full Name:
    Geno Kearney
    How much?
     
  3. enginefxr

    enginefxr Formula 3

    Aug 20, 2007
    1,753
    S&R Exotics
    Full Name:
    Gary Sharpe
    Oz Laboratories is at it again! :)
     
  4. cavlino

    cavlino Formula 3
    Silver Subscribed

    Mar 6, 2002
    1,737
    Ottawa, Canada
    Full Name:
    Carm Scaffidi
    Very nice :)
     
  5. fazzaz1

    fazzaz1 Karting

    Nov 4, 2003
    89
    Mississippi
    Full Name:
    Sam Scott
    I bought one from Goth, put it on in about ten minutes and agree with all he says about it.
     
  6. saw1998

    saw1998 F1 Veteran

    Jun 8, 2008
    8,237
    San Antonio, Texas
    Full Name:
    Scott
    #6 saw1998, Nov 25, 2009
    Last edited: Nov 25, 2009
    I was lucky enough to obtain one of these units from Goth quite a while ago. I can not over-emphasize the quality of this, and all Goth's work/products. Remember, all that OEM plastic box does is to: (i) serve as a resonator to decrease air intake noise; (ii) clutter up the engine compartment and hold more heat around the air intake box; and (iii) act as a potential air leak source causing erroneous MAF readings to the ECU. It serves no purpose substantive so GET RID OF IT! Plus you get the added benefit of having the carburetor-type air intake sound.


    EDIT: See, I got so emotional, I didn't even read Goth's original post and I ended up repeating a lot of what he already stated. Listen to him and get one of these. I promise you'll wonder why you didn't do do it earlier.
     
  7. THL

    THL Karting

    Jun 11, 2009
    153
    Denmark
    Full Name:
    Thomas Harvej Larsen
    Sounds fantastic, also want to know how much for these little wonders......

    Regards Thomas
     
  8. junglistluder

    junglistluder F1 Rookie
    Owner Silver Subscribed

    Mar 23, 2007
    3,557
    VA
    Full Name:
    Brendan
    need another poll option: "Already got one" :D
     
  9. MarkCollins

    MarkCollins F1 Rookie
    Owner

    Jul 2, 2002
    3,202
    South England
    Full Name:
    Mark Collins
    Daniel, post up when you get them in stock and I'll order straight away :)
     
  10. James-NZ

    James-NZ F1 Veteran

    Jun 26, 2007
    5,822
    Hamilton, NewZealand
    Full Name:
    James
    Oz, you need to add a 2.7 car to you garage so you can start making goodies to improve them too ;)

    Nice work with the nero anodized, looks great!!
     
  11. hacker-pschorr

    hacker-pschorr Formula Junior

    Sep 27, 2006
    584
    Land of Lambeau
    Already have one - fit's like a glove!!!
     
  12. MarkCollins

    MarkCollins F1 Rookie
    Owner

    Jul 2, 2002
    3,202
    South England
    Full Name:
    Mark Collins
    Hopeless service, it's nearly 24 Hours since I posted and not a word from Daniel :D
     
  13. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    #13 Ricambi America, Nov 26, 2009
    Last edited by a moderator: Sep 7, 2017
    HAHAHA... I'm on holiday until Monday morning. Trust me, I needed one. Worrying about Ricambi America 24-hours a day gets pretty rough on me, and my family.

    (I'll post 'em on Monday for sure)
    Image Unavailable, Please Login
     
  14. MarkCollins

    MarkCollins F1 Rookie
    Owner

    Jul 2, 2002
    3,202
    South England
    Full Name:
    Mark Collins

    Hey have a good one, looks great :)
     
  15. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    :eek: ........... you guys are awesome :D!! ...............looks like I need to send Daniel some more ....... :eek:!!! .......... I will get them out tomorrow ......... :) ..................... they will be $35 from Daniel

    ......... glad to hear you are getting some time off ....... :)
     
  16. psarofim

    psarofim Karting

    Aug 15, 2007
    55
    how do I buy one? Please e-mail me at [email protected] with the details, if possible.
     
  17. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    #18 gothspeed, Nov 27, 2009
    Last edited: Nov 27, 2009
    Looks great Daniel :)!!! Will this also make the 'featured parts' section?............. I cannot wait until I get enough parts on your site to warrant my own 'section' on there ........ :eek: ................... ;) .................. :D
     
  18. saw1998

    saw1998 F1 Veteran

    Jun 8, 2008
    8,237
    San Antonio, Texas
    Full Name:
    Scott
    I really like the black powder-coat finish and the indent in the cap, so much so that I'm going to order another one.
     
  19. bcwawright

    bcwawright F1 Veteran

    Jul 8, 2006
    5,234
    Georgia
    Full Name:
    Bruce
    Well well well....Scott does this ring a bell??.."you have a severe case of Ferrari F355 "accessory-itis".

    And I thought there was only a flu epidemic...lol
     
  20. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    #21 gothspeed, Nov 27, 2009
    Last edited: Nov 27, 2009
    :eek: ........... thank you Scott ............ :eek:!!!
     
  21. saw1998

    saw1998 F1 Veteran

    Jun 8, 2008
    8,237
    San Antonio, Texas
    Full Name:
    Scott
    Me? Never. :)
     
  22. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    Quick note ............. for those interested in this great new 'gothspeed' part ......... Daniel is recieving a batch of the GS355RDC52 as I type this :)!! Here is the Ricambi link:

    http://www.ricambiamerica.com/product_info.php?products_id=343566

    For those 5.2 355 owners who do not have one ........ you need one of these ........ you just may not know it yet :eek: :) ................ and to those whom already ordered and or have one installled ............ I thank you very much ......... your 355 is functionally improved and has hereby 'increased in value' .............. ;) ........... :D!!!!!


    Thank you James :) ........... you must have heard something :eek: .................. someone with a 2.7 355 with has stepped forward and may be getting a very 'custom fabricated' piece for it ........... it is a ways away ...... but may be some of my best work yet .......... :cool:
     
  23. THL

    THL Karting

    Jun 11, 2009
    153
    Denmark
    Full Name:
    Thomas Harvej Larsen
    Just ordered one, looking forward to recieve it :)

    Thomas
     
  24. mad dog

    mad dog Formula Junior

    Jan 5, 2006
    875
    suffolk uk
    Full Name:
    andrew
    I want one of these, anyone else in uk want one so we can save on shipping?
    Daniel save at least one for me please!
     

Share This Page