Dino Toolkits And Manual Sets By Chassis Number | FerrariChat

Dino Toolkits And Manual Sets By Chassis Number

Discussion in '206/246' started by 4CamGT, Jan 20, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    #1 4CamGT, Jan 20, 2012
    Last edited by a moderator: Sep 7, 2017
    All,

    It would be of interest to me and probably others to see what toolkits and manual sets came with your Dino by chassis #. Most important would be to clarify if you think it is the actual one delivered with your Dino or you did research to validate the type of bag, the tool pieces and manual set. This would be of interest to see the variety of tool bags, tools and manual sets. The one I'm showing is the original tool bag I just received from a past owner Of *03932* (1978-85 and verified it was with the Dino when he received it). It is brown pebble vinyl with a reverse opening flap.I put in the tools I already had as placeholders. WE KNOW THE SPARK PLUG WRENCH IS WRONG and possibly the pliers(not verified). Also so far as we know it should have the Sircodin wrenches as shown (in this case w/o writing). Here's a few images of the tool bag and its contents from *03932*. I will continue this thread with images of the jack, chock, and manual set for critique and feedback. Please share and post yours so we can learn from each other from the tool kit experts!

    Freeman
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    #2 4CamGT, Jan 20, 2012
    Last edited by a moderator: Sep 7, 2017
    Tom,

    I hope you don't mind but I put your tool kit image you posted earlier here for your Dino *05028*. I hope you post your jack/bag/chock and manual set as I understand these are original to your Dino.

    Freeman
    Image Unavailable, Please Login
     
  3. Edward 96GTS

    Edward 96GTS F1 Veteran
    Silver Subscribed

    Nov 1, 2003
    9,303
    the 206 dino tool kit pouch is the same as in post one by freeman, except, the cloth on the flap has the pebble grain vinyl(ie. no cloth, all vinyl).
    ed
     
  4. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    Interesting nuance! Never knew that!

    Freeman
     
  5. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    #5 4CamGT, Jan 20, 2012
    Last edited by a moderator: Sep 7, 2017
    Ed,

    Here's a bag as you describe. Chassis # unknown.

    Freeman
    Image Unavailable, Please Login
     
  6. Edward 96GTS

    Edward 96GTS F1 Veteran
    Silver Subscribed

    Nov 1, 2003
    9,303
    freeman,
    yes that's it.
    ed
     
  7. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    #7 4CamGT, Jan 20, 2012
    Last edited by a moderator: Sep 7, 2017
  8. TKO

    TKO Formula Junior

    Oct 22, 2004
    790
    SoCal
    Full Name:
    Tom Kearns
    #8 TKO, Jan 20, 2012
    Last edited by a moderator: Sep 7, 2017
  9. TKO

    TKO Formula Junior

    Oct 22, 2004
    790
    SoCal
    Full Name:
    Tom Kearns
    #9 TKO, Jan 20, 2012
    Last edited by a moderator: Sep 7, 2017
  10. TKO

    TKO Formula Junior

    Oct 22, 2004
    790
    SoCal
    Full Name:
    Tom Kearns
    #10 TKO, Jan 20, 2012
    Last edited by a moderator: Sep 7, 2017
  11. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    Now that's what I call complete!!!

    Freeman
     
  12. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    #12 4CamGT, Jan 21, 2012
    Last edited by a moderator: Sep 7, 2017
    All,

    This is the correct brown pebble vinyl top load jack bag that Matthias says is correct for *03932*(photo courtesy of Mathias Bartz). So if anyone has one of these bags I would be interested! I'd also be interested which chassis # had which jack bag.

    Freeman
    Image Unavailable, Please Login
     
  13. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    #13 4CamGT, Jan 21, 2012
    Last edited by a moderator: Sep 7, 2017
    All,

    As mentioned before, this is a work in progress. The tool kit bag is the only known piece that came with *03932*. All the other pieces I've found with the help of many of my friends here. Still need the correct spark plug wrench and jack bag as high priorities. I plan on getting the Italian language Warranty Card, as my Dino is original Italian spec. Also would like to find a battery card and clock tag if reasonable. I'm always learning and love hear from the experts.

    Freeman
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  14. Edward 96GTS

    Edward 96GTS F1 Veteran
    Silver Subscribed

    Nov 1, 2003
    9,303
    Freeman,
    Your jack is missing the little rubber bumper at the top side. It is avail as a repop.
    Also, you have a Blaupunkt radio manual, what model radio? Can you post a picture of your radio? Dealer or factory installed?
    Ed
     
  15. tx246

    tx246 F1 Veteran
    Owner Rossa Subscribed

    Nov 4, 2003
    6,475
    Texas
    Full Name:
    Shawn
    Freeman,

    You need ne original keyfob
     
  16. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    You are correct!
     
  17. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    I'd like to borrow the little rubber bumper from someone as its straightforward and cheap to make a mold and cheap to make new ones. The radio is original from when new(date code on back is 1972)but not factory installed. I've noticed other Italian spec Dinos around the time period like mine has the same Blaupunkt. I'll post an image later.
     
  18. Edward 96GTS

    Edward 96GTS F1 Veteran
    Silver Subscribed

    Nov 1, 2003
    9,303
    The rubber bumper is cheap to buy now. Why bother to repop it?
    Ed
     
  19. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    Because its easy and its cheap.
     
  20. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    #20 4CamGT, Jan 21, 2012
    Last edited by a moderator: Sep 7, 2017
    Ed,

    The radio is a Blaupunkt "Gosler CR". The rubber bumper from the vender I've seen sells them for $17.50 each and the "Klippan" plastic seat belt anchor cover is $110 each! We're molding these in the studio as we speak. We'll let you know how they come out. I love the challenge to see if we can make them if its simple and affordable.

    Freeman
    Image Unavailable, Please Login
     
  21. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    Shawn,

    If you get a chance, please share your tool kits and manual sets! You have the collection to end all!!

    Freeman
     
  22. tx246

    tx246 F1 Veteran
    Owner Rossa Subscribed

    Nov 4, 2003
    6,475
    Texas
    Full Name:
    Shawn
    I wouldn't go that far.....
     
  23. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    #23 4CamGT, Jan 22, 2012
    Last edited by a moderator: Sep 7, 2017
    I want to share these rare original period NOS Shell Oil tags I've collected. Maybe someone wants to trade a battery card, clock tag or spark plug wrench for one? Not for sale. Perfect icing on the cake for concours!

    Freeman
    Image Unavailable, Please Login
     
  24. Nuvolari

    Nuvolari F1 Veteran
    Owner Silver Subscribed

    Sep 3, 2002
    6,419
    Toronto / SoCal
    Full Name:
    Rob C.
    Sorry I am a little late to the party but Freeman the Klippan plastic seat belt covers are the same as used on a BMW 2002. Readily available from a BMW wrecker.
     
  25. 4CamGT

    4CamGT F1 Rookie

    Jun 23, 2004
    2,654
    Southern California
    Rob,

    If you happen to go to a BMW wrecker and find four, please grab them for me! We made a mold of one and are popping out copies. They look pretty good but I'd prefer original parts.

    Freeman
     

Share This Page