Transparent Paint Protection Film Specialists

Hello Fchat members. We would like to introduce ourselves as Ferrarichat's new sponsor. Our company office is based out of Alameda, CA and specialize in window films (auto and commercial) and paint protection film applications. We have been in the window films industry for 9 yrs and in the paint protection for 6. All of our techs are certified for installations and are prepped w/ the most advanced installations techniques to produce the highest quality results.

We would like to make available some information about paint protection film, some tips on maintenance and how to search out professional dealers for your community. As quality of film makes a tremendous difference in the way it looks after an installation, it is only one of three ingredients for a "clear" install. The 2nd would be the installation quality and third is the design of the clear bra kits.

For the 6 years we have been in the paint protection film industry, we have used and tested every single film manufacturer on the market. Although, results may vary, this is what we have noticed based on our experience in the field. Below are our opinions of each (we do stress Ferrari chat members to do your own research and not rely on our info source as definitive):

Films on the Market:

3M - 1st generation film had many fading issues, which prompted an upgrade in early 2004. The film still uses the same urethane, but a clearer adhesive. The old film also received many complaints about "orange peel" texture that made the film very visible on darker colored vehicles. 3M's new film is clearer, but is still behind in strength and clarity. 5 Yr Warranty

Avery - Film generally fades w/in 1yr and customer service is poor. The company has all, but fall off the face of the paint protection industry.

Clearshield - Film's quality is very similar to 3M's 1st generation film, if not the same. Tends to yellow and crack in 2-3 yrs. Similar to 3M's 1st gen film, 90% of the adhesives will remain on paint when film is removed. 5 Year Warranty.

Llumar (CP Films) is one of the clearer films on the market. Customer service is lacking and company tends to work warranty claims based on the small prints. Film's quality does not reject environmental oxidation, bird droppings, and other chemicals as well as 3M and Venture. Film is not O.E. approved. Lifetime Warranty

Venture - film's clarity along w/ its patented acrylic adhesives make it the clearer film. Excellent customer service and film looks great on all colors - even black. Lifetime Warranty

INSTALLATION & SOFTWARE DESIGN
Film's quality is only as good as the installation. Searching out a good installer is not an easy task as many companies make outrageous claims of experience and expertise. The most important thing is to see what type of coverage you will get and whether or not it will be in one piece especially for the front bumper. Companies that use 1 piece for bumpers are generally more skilled at paint protection film installations, while software designers such as Clearshield & Invincashield created these kits for those DIYers in mind.

Below are some tips to searching out good installers:
-what type of software do they use. This will dictate their skill level as companies utilizing the 3 softwares above are used to having these kits come in multiple pieces for ease of installation.
-how detail oriented are they........you will have to pick up these little signs while talking with the company or installer
-how long have they been installing paint protection
-are they certified? although certification is not a pre-req for being a professional installer, it does show that they received some type of training.
-can they do custom work with one piece of film. This is generally meant for those with aftermarket bumpers or would like to have certain areas wrapped that is not computer generated designs.
-if they do custom work, do they cut on the vehicle? There are companies w/ installers that are skilled enough to cut and trim film on the car without cutting through the film and down onto the paint surface.
-Take a look at their work or better yet, ask the locals about their reputation.

FAQ
1. Will it yellow, bubble or crack over time? Depends on the film (Venture comes with a Lifetime Warranty from yellowing, bubbling, and cracking)
2. Can it be washed and waxed? Yes, to maintain the film, it is meant to be waxed and washed 2 wks after installation.
3. When my car gets dirty, the line on the hood is more visible. What can I do about it? Wash the vehicle and use a wet q-tip and run it along the edge and this will clean up the dirt or wax build-up
4. If I ever remove the film, will there be a two-tone effect? No, 3m & Venture are UV stable and allow the rays to penetrate; therefore, there will not be any 2-toning if film is ever removed.
5. Would the paint get stripped if I remove the film after a few yrs? The film is paint-safe on OEM paint.
6. Can I repaint my bumper and put a film on right away? Yes, you can, but you risk having the paint get pulled off if it is removed later. The recommended new paint curing time is 30-60 days before clear bra application
7. From my local clear bra installer, Venture is easy to install. Well yes and no. Yes, it is easier to install due to its elasticity, but that doesn't mean the quality of install will be ideal. In actuality, the film is more difficult to work with to bring out a truly invisible installation because the film is so clear.........it does not hide any type of installation flaw. While companies like 3m, Clearshield and Avery has some orange peel texture, it helps hide some of the installation imperfections.
8. Why do you charge more than these other guys? Our company was founded with one idea in mind - "Perfection is Our Standard". We truly believe that you get what you pay for and we provide our clientele with excellence in installation, warranty, and service.
9. How long does it take to install a full kit? We are typically done with the actual installation between 1.5-2.5 hrs for a full kit. The standard in this industry goes anywhere from 4 hrs to 8 hrs.
10. I don't like to see the line on the hood, can you cover the entire hood? Yes, we can. We are one of several companies in the U.S. that has film large enough to wrap entire hoods as well as entire panels.

Hopefully, this thread will be helpful for those wondering about getting a clear bra for your vehicles. Our company is exclusively mobile and can travel to almost anywhere in the world for group buys. If anyone is interested in setting up a group buy for your area or would like a quote, please feel free to email us at: [email protected] or call us directly at
B:510-390-6920
B:510-406-1500
-we reply to all of our email inquiries within 24hrs.

Below are pictures of our work.......most of these applications have wrapped edges to produce the most seamless results possible
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

We tour socal along with various metro areas of the states every 4-6 wks. We just returned from a one wk 27 vehicle install in socal in early February. We're returning in two wks.........if you're interested, please do not hesitate to email or call us. Here's a link to some of Fchat's happy customers in norcal......we're still new to this site, so our client base here is still limited, but we do have numerous references from other forums. If anyone would like references, we'd be glad to shoot them out........thanks! http://www.ferrarichat.com/forum/showthread.php?goto=newpost&t=50417

 

Thanks for the kind words guys. We tour socal every 4-6 wks and our next scheduled tour is between April 20-27. For those interested, please contact us directly at [email protected] or by phone - 510-390-6920. Thanks again!