Ferrari Speedline rim question

You need the wrench.

 

That center cap looks extremely similar to the BBS center caps, and those BBS center cap wrenches are plentiful on eBay - two styles, ranging from $12 to $40. Measure the diameter across the flats of the 'nut', then check the eBay ads. some say 80mm.

Search eBay for "BBS center cap" to see the various similar BBS versions;
Search eBay for "BBS center cap wrench" to see the wrench styles and options.
Image Unavailable, Please Login

 

The correct wrench looks round not hex. I have two of them. But Copenhagen?

 

I have a customer with similar wheels. It has a round wrench with notches that fit just inside the hex of the cap, around the black center.

Interestingly enough, I discovered they were not all exactly the same. While putting the caps back on, the last one would not screw on. I could not get the threads to start. I finally tried another cap and it went right one. I found that two wheels had center caps that were just fractionally bigger and would not seat in and allow the threads to start.

Bottom line. Mark the caps and wheels to avoid any issues.

 

NO STOP! DO NOT turn the big hex on the center cap as it doesn't turn, Speedline is not like that. Turn ONLY the Black plastic piece by inserting an inch flat metal "U" shape into the small slot and turn it, you can only then remove the big hex piece after removing the black plastic piece.

The black plastic piece is screwed directly on to the wheel that keeps the Big Hex from coming off.
Pics below is my friends Speedline 17"
Image Unavailable, Please Login

 

I think you got it!