360 switch plate holder removal | FerrariChat

360 switch plate holder removal

Discussion in 'Australia' started by knocker, Aug 17, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. knocker

    knocker F1 World Champ
    Silver Subscribed

    Jul 10, 2017
    11,838
    Sydney Aus
    Full Name:
    Adrian
    #1 knocker, Aug 17, 2017
    Hi all I want to remove the switch plate holder to get to the alarm led,I tap it and it's on occasionally so want to have a look is it as easy as prying it out with something or more involved any help would be great cheers ASR fog lights sport defrost ect switch cluster
     
  2. Hypek9

    Hypek9 Karting

    Apr 9, 2012
    162
    Australia
    #2 Hypek9, Aug 17, 2017
    Just pulls out, doesn't need much force
     
  3. F-Serge

    F-Serge Formula 3

    Aug 3, 2004
    1,921
    UAE
    Full Name:
    Serge
    #3 F-Serge, Aug 17, 2017
    could it be that your alarm siren is on its way out hence alarm LED is on? common problem with 360, I had to replace mine when I bought the car.
     
  4. knocker

    knocker F1 World Champ
    Silver Subscribed

    Jul 10, 2017
    11,838
    Sydney Aus
    Full Name:
    Adrian
    #4 knocker, Aug 18, 2017
    All good cheers guys thanks Hypek9 bit guts and off she popped all good F-Serge loose wire,comes on and goes off as it should ,already done the siren module job��Cheers fellas
     

Share This Page