Blow-by can | FerrariChat

Blow-by can

Discussion in '365 GT4 2+2/400/412' started by markcF355, Sep 5, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. markcF355

    markcF355 F1 Rookie
    Rossa Subscribed

    Jun 6, 2004
    3,493
    Schmeckelstan
    Full Name:
    Mark
    Does anyone know where I can get a blow-by can for a 400i?
     
  2. EVOeng

    EVOeng Karting

    Jul 1, 2011
    77
    London, England
  3. Ak Jim

    Ak Jim F1 Veteran
    Owner Rossa Subscribed

    Dec 23, 2007
    8,498
    North Pole AK
    What if any maintenance is required on these? Should they periodically be removed and cleaned out with a solvent?
     
  4. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,147
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    Drive the car once in a while? ;) Seriously, I'll bet the OP has to replace it because of rust issues (water condensation on the inside rusting the unprotected steel). When the rusty flakes collect and block the liquid drain line port that's when they need an internal rinse out.
     
  5. markcF355

    markcF355 F1 Rookie
    Rossa Subscribed

    Jun 6, 2004
    3,493
    Schmeckelstan
    Full Name:
    Mark
    Actually, I stripped the old paint off to find a million rust holes.
    Ferrparts is sending me a used one.
     
  6. markcF355

    markcF355 F1 Rookie
    Rossa Subscribed

    Jun 6, 2004
    3,493
    Schmeckelstan
    Full Name:
    Mark

Share This Page