308GTSI custom molded rear speaker pa... Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » For Sale » 308GTSI custom molded rear speaker pannel « Previous Next »

Author Message
charles claussen (Atlantaman)
Posted on Tuesday, July 17, 2001 - 2:42 pm:   

I took the existing material from the vertical part which did not cover it completely and had to trim it with black leather. I am currently ordering new headliner material(italiancarparts.com) to recover mine.

The panel does not block your view at all. I developed it so that it is below the window and out of the 1/4 rear windows field of vision.

I put 4x6" kenwood speakers in mine and later added a set of raw Bose "cube" speakers. I actually removed the horizontal panels too and cut out small portions of them to accommodate huge magnets on the "cube "speakers.

Ps. to get the existing panel out and install this rather time consuming and difficult. the screws go thru the firewall into the engine bay. you will need get to the aluminum panel in front of the motor and pull it back a little to get to the nuts.
JPM (John_308qv)
Posted on Tuesday, July 17, 2001 - 1:30 pm:   

Looks interesting. A few questions:
What size speakers fit?
How much of the rear window does it cover?
Where do you get the covering material?
Is that trim material on the top portion of the bottom picture or is that the fiberglass finish?
How much is shipping to the mid-west?

Thanks, John
charles claussen (Atlantaman)
Posted on Monday, July 16, 2001 - 10:19 am:   

FINALLY HEAR YOUR TUNES! fiberglass molded speaker pannel for 308. Remove the vertical pannel at rear window and install this. Sold without speakers or covering for $150.00. [email protected] ,678-427-0435 atlanta.
Charles
speakers1 speakers2

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration