| Author |
Message |
Costantino Bertuzzi (Costa)
New member
Username: Costa
Post Number: 16
Registered: 8-2003
| | Posted on Friday, October 31, 2003 - 7:15 pm: | |
Jeremy; You have to reset the parameters with the Sd1; if you want we can take care of it at Fx performance.
Costantino |
Steve Schwartz (Fastred355)
New member
Username: Fastred355
Post Number: 7
Registered: 10-2003
| | Posted on Thursday, October 30, 2003 - 4:48 pm: | |
Call the Auto Gallery, they stand behind their work. |
Jeremy (Jdb)
New member
Username: Jdb
Post Number: 30
Registered: 4-2003
| | Posted on Wednesday, October 29, 2003 - 6:05 pm: | |
Thanks for the suggestion -- I just posted to the technical Q&A forum. |
1987 Jerry (Slag_328gts)
Member
Username: Slag_328gts
Post Number: 334
Registered: 9-2003
| | Posted on Wednesday, October 29, 2003 - 5:59 pm: | |
Not sure - You might want to try posting in the Technical area as you may get more responses than in the California area. |
Jeremy (Jdb)
New member
Username: Jdb
Post Number: 28
Registered: 4-2003
| | Posted on Wednesday, October 29, 2003 - 5:41 pm: | |
When I got my 355 last month, I could not operate the top despite following the manual's instructions exactly. I just had my car serviced at Auto Gallery, and they refilled some fluid for the automatic top and said it now worked fine.
I got home and still have no luck with the top. I'm following these procedures:
1. Parking brake engaged
2. Key in Position #2 or On
3. Foot on brake
4. Visors down
I use the center latch and lift the top up about 6 inches. The windows come down 2 inces, as they're supposed to. The top beeps as it's supposed to. I push and hold the "retract top" button in the center console and nothing happens -- it just keeps beeping. I know the seats are supposed to move forward, but they don't.
Am I missing a step here? |