| Author |
Message |
Jonathan (Birdman)
Junior Member
Username: Birdman
Post Number: 68
Registered: 6-2003
| | Posted on Sunday, July 13, 2003 - 8:03 pm: | |
On the 308, one set of lights is wired "daisy chained" off the other side and the connecting wire is just crimped to the connector on the first light. It's possible that the wire going from one side to the other is broken or not making a good crimp connection. If one light works, you have power to the taillights, so that's the good news! |
dave handa (Davehanda)
Intermediate Member
Username: Davehanda
Post Number: 1228
Registered: 5-2001
| | Posted on Sunday, July 13, 2003 - 1:25 pm: | |
Quick and dirty (short of tracing the bad wire) would be to jumper a wire from the other "good" brake light wire over to the one that is not working. |
mjg (Mike_g)
New member
Username: Mike_g
Post Number: 2
Registered: 5-2003
| | Posted on Sunday, July 13, 2003 - 6:57 am: | |
I have an 85 mondial cab and 1 brake light does not work. Bulb and fuse are good, but there is no power to red wire coming into the bulb |