Author |
Message |
Charles I Claussen (Atlantaman)
New member Username: Atlantaman
Post Number: 15 Registered: 3-2002
| Posted on Tuesday, July 16, 2002 - 10:25 pm: | |
wow--that's weird--mine are all steel. I think I can get them out if I remove the motor but that is a last resort--maybe I have come to that. |
Bill Sebestyen (Bill308)
Member Username: Bill308
Post Number: 275 Registered: 5-2001
| Posted on Tuesday, July 16, 2002 - 5:24 pm: | |
Charles, I had the same problem when I replaced my lights. I don't know if your headlight assemblies are the same as on my 78, but I found that screwing in the bucket aiming, adjuster, screws provided just enough clearance to remove the fiberglass casing. Even then, it was a struggle. |
Charles I Claussen (Atlantaman)
New member Username: Atlantaman
Post Number: 14 Registered: 3-2002
| Posted on Monday, July 15, 2002 - 11:51 pm: | |
I am disassemling the front of my car for repainting but I can not get the headlights out. I tried up and even down through the bottom--no go...any sugggestions? |