308 Gauges backplate | FerrariChat
Buy

308 Gauges backplate

Discussion in '308/328' started by DannyR, Oct 17, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. DannyR

    DannyR Karting

    Apr 6, 2005
    129
    Alabama
    Full Name:
    Danny Roberts
    #1 DannyR, Oct 17, 2006
    Curious if anyone has any experience in removing the back plate from around the speedo / RPM...etc?
    I'm thinking about changing it to a silver one.
    How hard is it?

    Thanks alot, Danny / 1980 308 GTSi
     
  2. rolindsay

    rolindsay Formula 3

    Jul 14, 2006
    1,022
    Houston, TX
    Full Name:
    Rick Lindsay
    #2 rolindsay, Oct 17, 2006
    Don't quite know what you're asking. Just had my '79's dash apart last weekend. Give me a little more info and I might be able to help.
    -rick '79308gtb
     
  3. Birdman

    Birdman F1 Veteran

    Jun 20, 2003
    6,689
    North shore, MA
    Full Name:
    THE Birdman
    #3 Birdman, Oct 18, 2006
    Danny,
    Not hard at all. Loop some dental floss around each of the four indicator lamps in the corners of the plate and pull them out. Behind each one is a screw. Unscrew all four and try not to drop the screws into the dash someplace. Now just pull the plate out with the guages attached. Now just move the guages to another plate and re-install.

    Birdman
     
  4. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,473
    Birmingham, AL
    Full Name:
    Tommy
    #4 Dr Tommy Cosgrove, Oct 18, 2006
    Just like Birdman says, very easy and just 4 screws. Just make sure you are using a magnetized screwdriver or you will drop those screws when you are pulling them out and they will disappear forever.
     

Share This Page