Error codes on a 95 355 | FerrariChat

Error codes on a 95 355

Discussion in '348/355' started by xavior, Dec 30, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. xavior

    xavior Formula 3

    Aug 22, 2006
    1,793
    Full Name:
    .
    Is there anyway to check this without going to a shop? Like a honda, you can loop the computer connection and it will flash out the errors to you. Can this be done with the ODB1 on my car? Everyone wants to charge me over 10K to fix everything on my car but no one wants to hook it up to a computer or does not have one. I get check engine 1-4 and slow down 5-8. Thoughts?
     
  2. UConn Husky

    UConn Husky F1 Rookie

    Nov 11, 2006
    4,425
    CT
    Full Name:
    Jay
    I have the exact same question; I connect my laptop to the OBDII port on my STi and can read/log every sensor in realtime, along with getting the CEL codes. Is there anyway to do this on a 355? If not, what can be used to read the information?
     
  3. xavior

    xavior Formula 3

    Aug 22, 2006
    1,793
    Full Name:
    .
  4. Nicksta

    Nicksta Formula Junior

    Sep 16, 2006
    535
    DC Ranch & NY, NY
    Full Name:
    Nick Ingle
    I heard of somebody reading these codes off a laptop, but they were using some special software if I'm correct. I'll dig around and see if I can find the reference. It may have actually been with regards to turbocharging a 348 and sorting out the bugs, but I imagine that the same process would help you out.
     
  5. ferrame

    ferrame Formula 3

    Mar 2, 2005
    1,196
    Orange, Calif
    On a 95 F355 there are two self-dianostic button located in the engine compartment on each side under the thin penals obove rear fender. You need to remove those 3 screws to have access to the buttons.
     
  6. bigme

    bigme Karting

    Nov 24, 2006
    98
    Illinois
  7. xavior

    xavior Formula 3

    Aug 22, 2006
    1,793
    Full Name:
    .

Share This Page