correct details in front spare area | FerrariChat
Buy

correct details in front spare area

Discussion in '206/246' started by euro70, Jan 22, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. euro70

    euro70 Rookie

    Dec 9, 2006
    23
    #1 euro70, Jan 22, 2007
    need help!..can some one provide pictures and/or description of the the details in the front compartment below the spare wheel..in battery area for L series(maybe other later as well)...i have an opening ...looks like an acess panel is missing...and threaded vertical rods in three locations around the opening which extend above the level of the large liner(shaped for the spare) which is intact...everything below is all there ,,horns battery etc....what does this missing acess panel look like? what other details are missing....also a picture of the correct knob for the rake adjustment on the seat of the L series....thanks for assistance!!!...frank..
     
  2. tx246

    tx246 F1 Veteran
    Owner Rossa Subscribed

    Nov 4, 2003
    6,663
    Texas
    Full Name:
    Shawn
    #2 tx246, Jan 22, 2007
    one of the rods (towards the center) is for the battery hold down. the other two are for securing the battery cover. the reason the battery hold down rod appears to extend to high, is the battery cover is contoured so it creates a horizontal surface, while the liner is sloped downwards towards the front. in other words, the heighth of the battery cover is larger on the front side than the back side.

    the battery cover is made of metal and has an embossed cross section to provide strength.
     
  3. 4redno

    4redno Formula 3

    Mar 21, 2006
    1,067
    Seattle, WA
    Full Name:
    Keith Mitchell Wintraub
    #3 4redno, Jan 22, 2007
    Why not send photos so that I can look and see what is different about yours.

    Thx...Keith
     
  4. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2003
    43,741
    26.806311,-81.755805
    Full Name:
    Dave M.
    #4 dm_n_stuff, Jan 23, 2007
  5. euro70

    euro70 Rookie

    Dec 9, 2006
    23
    #5 euro70, Jan 23, 2007
    thanks for info from both of you.....i viewed body diagram provided by east of philly....and saw what the parts look like ... so i know exactly what i am after...battery hold down and hardware....acess panel and hardware....is there a source for used orig as opposed to new repro???? you guys are great!!!
     
  6. rwk360

    rwk360 Formula Junior

    Aug 26, 2005
    394
    Pebble Beach, CA
    Full Name:
    R W Kenton
    #6 rwk360, Jan 23, 2007
    FYI, the battery cover on my (L series), which I presume to be OEM, is fiberglass.
     
  7. rwk360

    rwk360 Formula Junior

    Aug 26, 2005
    394
    Pebble Beach, CA
    Full Name:
    R W Kenton
    #7 rwk360, Jan 23, 2007
    When I bought my car (fall of '01), both plastic seat adjustment knobs were missing; I got a set from Dennis McCann (allferrariparts.com I believe) at that time; astronomically expensive for what they are, but welcome to the L-series world! Also, there is a right and a left knob (which are different)!
     
  8. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2003
    43,741
    26.806311,-81.755805
    Full Name:
    Dave M.
    #8 dm_n_stuff, Jan 23, 2007
    Dennis is a great source for parts, and he has stuff you just can't find elsewhere, but you sure pay a premium for the service.

    No offense meant to Dennis, who I use for some stuff, but I try to shop the parts first then fall back to him if I can't find them elsewhere.

    If you'd rather not shop, he's certainly the closest thing to one stop shopping for this stuff that I've found.

    DM
     
  9. 4redno

    4redno Formula 3

    Mar 21, 2006
    1,067
    Seattle, WA
    Full Name:
    Keith Mitchell Wintraub
    #9 4redno, Jan 23, 2007
    I know that I probably paid for a large portion of Dennis McCann's house restoration during my Dino restoration but I was OK with that because Dennis and Norma have the correct stuff and shoot straight. While you can no doubt get parts from a variety of suppliers (and I did), just be careful that you know NOS from repro and pay accordingly.

    At this stage, repro may be all you can find for some things.

    ...Keith
     
  10. tx246

    tx246 F1 Veteran
    Owner Rossa Subscribed

    Nov 4, 2003
    6,663
    Texas
    Full Name:
    Shawn
    #10 tx246, Jan 23, 2007
    Last edited by a moderator: Sep 7, 2017
    here are some photos from my e series dino. i am sure there are differences as the cars progressed in production and series. this is the hood area of s/n 08468. the battery cover is metal. the fiberglass covers i have seen are repro's. that is not to say that they weren't correct, but for the e series, the metal cover is definitely the correct cover.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  11. John Corbani

    John Corbani Formula 3
    Honorary Owner

    May 5, 2005
    1,153
    Santa Barbara, CA
    Full Name:
    John Corbani
    #11 John Corbani, Jan 23, 2007
    Green aluminum wheel chock goes under the rubber strap under the spare. Not tool kit.
     
  12. tx246

    tx246 F1 Veteran
    Owner Rossa Subscribed

    Nov 4, 2003
    6,663
    Texas
    Full Name:
    Shawn
    #12 tx246, Jan 23, 2007
    can you post photo's?

    i have always seen yellow or blue whel chocks. additionally, i have always heard that the toolkit was located here. based on the style of straps in my cars, the tool kits fit but the wheel chocks don't. am i missing something?
     
  13. tx246

    tx246 F1 Veteran
    Owner Rossa Subscribed

    Nov 4, 2003
    6,663
    Texas
    Full Name:
    Shawn
    #13 tx246, Jan 23, 2007
    can you post photo's?

    i have always seen yellow or blue whel chocks. additionally, i have always heard that the toolkit was located here. based on the style of straps in my cars, the tool kits fit but the wheel chocks don't. am i missing something?
     

Share This Page