Fabspeed 430/360 tips | FerrariChat

Fabspeed 430/360 tips

Discussion in '360/430' started by jmiller, Jan 23, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jmiller

    jmiller Rookie

    Joined:
    Oct 26, 2006
    Messages:
    32
    If you recognize the profile name, you will know that I was running Brandywine Performance and have now moved to Fabspeed Motorsports.

    I'm looking forward to working with everybody again

    Fabspeed F430 tips
    *F430 tips available with or without valves
    *quad tips made of T 304 stainless steel
    *simple bolt on
    *Best looking tips for F430

    **F430 tips with valves $2595
    **F430 tips without valves $1995

    [​IMG]
    http://i121.photobucket.com/albums/o206/fabspeed/F430%20tips/f430tipsoncar.gif
    http://i121.photobucket.com/albums/o206/fabspeed/F430%20tips/f430tips.gif

    Fabspeed F360 tips
    *T 304 stainless quad tips
    *no valves
    *will fit stock or Tubi Mufflers

    **F360 Tips $1095

    http://i121.photobucket.com/albums/o206/fabspeed/F360%20tips/F360tipsoncar.gif


    Feel free to email, call, pm with any questions or comments
     
    jmiller, Jan 23, 2007
    #1
  2. MufflerMan

    MufflerMan Formula 3

    Joined:
    Jun 12, 2005
    Messages:
    1,564
    Location:
    Sacramento Ca
    Full Name:
    Colby Sandman
    Do you have a picture of these looking down at them on a 360? All of your pictures published have been pretty well straight on. I am curiuos to see a different perspective.
     
    MufflerMan, Jan 23, 2007
    #2
  3. jmiller

    jmiller Rookie

    Joined:
    Oct 26, 2006
    Messages:
    32
    as requested
    [​IMG]
     
    jmiller, Jan 24, 2007
    #3
  4. JOEA2

    JOEA2 Formula 3

    Joined:
    Feb 2, 2006
    Messages:
    1,225
    Location:
    Staten Island, N.Y./ Sea Girt,N.J.
    Full Name:
    Joe A
    You are doing mine on Feb. 3rd including Hi Flow Cats.
     
    JOEA2, Jan 24, 2007
    #4
  5. jmiller

    jmiller Rookie

    Joined:
    Oct 26, 2006
    Messages:
    32
    Joe
    looking forward to seeing the car here
     
    jmiller, Jan 30, 2007
    #5
  6. MufflerMan

    MufflerMan Formula 3

    Joined:
    Jun 12, 2005
    Messages:
    1,564
    Location:
    Sacramento Ca
    Full Name:
    Colby Sandman
    Thank you for the picture! I talked to Jay today and he is sending me a set for review. I will let you all know my evaluation.
     
    MufflerMan, Jan 31, 2007
    #6
  7. jmiller

    jmiller Rookie

    Joined:
    Oct 26, 2006
    Messages:
    32
    mufflerman
    sounds like a plan
    we look forward to working with you
     
    jmiller, Feb 1, 2007
    #7
  8. JOEA2

    JOEA2 Formula 3

    Joined:
    Feb 2, 2006
    Messages:
    1,225
    Location:
    Staten Island, N.Y./ Sea Girt,N.J.
    Full Name:
    Joe A
    I had my hi flow cats and tips with valves installed by Fabspeed yesterday. They look and sound great. Big improvement over stock.
     
    JOEA2, Feb 4, 2007
    #8
  9. jmiller

    jmiller Rookie

    Joined:
    Oct 26, 2006
    Messages:
    32
    Joe
    car looked great, glad you liked the parts.
    I will be posting a few pics up later today
     
    jmiller, Feb 5, 2007
    #9
  10. jmiller

    jmiller Rookie

    Joined:
    Oct 26, 2006
    Messages:
    32
    Here are a few more pics.

    Fabspeed F430 tips with valves and race cats save you 16lbs off the back of the car to increase handling!!!

    Not to mention the looks and power gains

    [​IMG]
    [​IMG]
    [​IMG]
     
    jmiller, Feb 6, 2007
    #10
  11. roro

    roro Formula Junior

    Joined:
    Aug 28, 2006
    Messages:
    843
    Location:
    Houston, TX
    Full Name:
    Ro
    Can you post those pictures on here directly? My computer is not pulling any of the links up.
     
    roro, Mar 4, 2007
    #11
  12. Senna1994

    Senna1994 F1 World Champ

    Joined:
    Nov 11, 2003
    Messages:
    13,192
    Location:
    Orange County
    Full Name:
    Anthony T
    Same here, I cannot bring it up either.
     
    Senna1994, Mar 4, 2007
    #12
  13. RichardCH

    RichardCH F1 Rookie BANNED

    Joined:
    Jan 16, 2005
    Messages:
    4,661
    the cats sure but for the tips can't one just buy the chrome sleeves for $300/400 which do the same job with OEM ?
     
    RichardCH, Mar 4, 2007
    #13
  14. MufflerMan

    MufflerMan Formula 3

    Joined:
    Jun 12, 2005
    Messages:
    1,564
    Location:
    Sacramento Ca
    Full Name:
    Colby Sandman
    Last edited by a moderator: Sep 7, 2017
    MufflerMan, Mar 4, 2007
    #14
  15. roro

    roro Formula Junior

    Joined:
    Aug 28, 2006
    Messages:
    843
    Location:
    Houston, TX
    Full Name:
    Ro
    That looks awesome! What exhaust system is that on? Tubi?
     
    roro, Mar 4, 2007
    #15
  16. Exotica Motorsports

    Exotica Motorsports F1 Rookie

    Joined:
    Nov 1, 2003
    Messages:
    3,673
    Location:
    Washington
    Full Name:
    Jason Godsil
    Exotica Motorsports, Mar 5, 2007
    #16
  17. MufflerMan

    MufflerMan Formula 3

    Joined:
    Jun 12, 2005
    Messages:
    1,564
    Location:
    Sacramento Ca
    Full Name:
    Colby Sandman
    Well you could actually buy the tips for less than that, however the labor is a different story. I am sure you noticed my pictures and what it takes to remove the tips. The whole ass end of the car has to come off. Once you have the car apart you could cut the old tips off of the stock pipes, but from there it gets more difficult. In order to get the tips in the right position, you would have to reinstall the bumper and then tack weld the tips in place where you want them. Once the tips are tacked, you would have to remove the bumper again to weld them on. I would remove the pipes from the muffler and weld them on a bench so not to damage the car with electrical current from the welding, and not to get any weld spatter on the car. Once they are welded, you would reinstall the pipes, and then the bumper. In the end I suppose you could save a few bucks, but you would have to find a shop you could trust to do this amount of work, and for that matter one that would want to. I have all the means to do this myself and I chose the Fabspeeds because they wee already done, my time is worth more to me than what it would take to make my own. My opinion of course, take it for what it is worth.

    Someone asked what kind of Muffler I have, it's a Tubi.
     
    MufflerMan, Mar 5, 2007
    #17
  18. tonyc

    tonyc Formula 3

    Joined:
    Oct 19, 2003
    Messages:
    1,665
    Location:
    Monterey, CA
    Full Name:
    Tony C
    Your car and tips look fabulous! Do they stick out farther than the stock tips? If so, the usual condensation drip may miss the lower bumper :)
     
    tonyc, Mar 6, 2007
    #18
  19. JOEA2

    JOEA2 Formula 3

    Joined:
    Feb 2, 2006
    Messages:
    1,225
    Location:
    Staten Island, N.Y./ Sea Girt,N.J.
    Full Name:
    Joe A
    Sleeves are sleeves and Tips are tips. They are not the same!
     
    JOEA2, Mar 6, 2007
    #19
  20. jmiller

    jmiller Rookie

    Joined:
    Oct 26, 2006
    Messages:
    32
    Fabspeed F430 tips
    *F430 tips available with or without valves
    *quad tips made of T 304 stainless steel
    *simple bolt on
    *Best looking tips for F430

    **F430 tips with valves $2595
    **F430 tips without valves $1995
    http://i158.photobucket.com/albums/t93/Fabspeed/Ferrari%20F430%20Tips/f430tipsoncar.gif
    http://i158.photobucket.com/albums/t93/Fabspeed/Ferrari%20F430%20Tips/f430tipsoncar1.gif
    http://i158.photobucket.com/albums/t93/Fabspeed/Ferrari%20F430%20Tips/f430tips.jpg
    http://i158.photobucket.com/albums/t93/Fabspeed/Ferrari%20F430%20Tips/f430tips.gif

    Fabspeed F360 tips
    *T 304 stainless quad tips
    *no valves
    *will fit stock or Tubi Mufflers

    **F360 Tips $1095

    http://i158.photobucket.com/albums/t93/Fabspeed/Ferrari%20360%20%20tips/F360tipsoncar.gif
    http://i158.photobucket.com/albums/t93/Fabspeed/Ferrari%20360%20%20tips/f360tipslookingdown.jpg


    Feel free to email, call, pm with any questions or comments[/QUOTE]
     
    jmiller, Mar 21, 2007
    #20

Share This Page