Where can I find parts for my Classic Ferrari?

Exactly the same as my '79 308GTB.

 

Yep,Superformance are very good,reasonable prices too.

 

So what will it take for Ferrari Classiche to produce a batch of Veglia Clocks for our 308's???

 

I HIGHLY recommend adding a bolt-on supercharger.
My Mondial-8 was pretty sluggish until I added some extra horsepower.

Now it's as fast as a 348!

Carl's kit has every part in it you need and comes with a great installation manual with lots of photos.
Check it out here:

http://www.928motorsports.com/parts/ferrarisupercharger.php

 

I had mine repaired by a local clock repair shop for $50. Check your local phone book. (Just DON'T tell him it's for a Ferrari ) He just changed the lense on mine.

 

Stuart, I just sent you a PM, have tried unsuccessfully 4 times during the past 2 months to order some small parts for my 1975 308GT4. Hope you can help.

 

Bavarian autosport had it for $39.95.

Part number is 61311363459.

It fits a BMW 320i, 6and 7 series to 82 and 5 series to 88.

 

can anyone help ... am having problems locating a proper GT 4 toolkit . One with the plug spaner and the carb key . .... many thanks

 

www.ricambiamerica.com/
owners name is dave he is awesome I think this is a great source

 

You have to use a later 328 roll and add the carb tool from Pierce Manifolds.....

 

Except the owner's name is DANIEL (Daniel Pass), and you're right, it IS a great source!!

 

shhhhhhh..... don't tell Daniel. What he doesn't know won't hurt him

Dave

 

I recently received a parts list from Verell's Unobtainium Supply Co.

I'm absolutely amazed at the large amount of NLA parts Verell now sourcing,
also, he repairs column(headlight) switches & targa top latches!

Unobtainium doesn't have a web site yet. So I thought I'd post a list of the
'unobtainium' he supplies here where people are likely to find it. I didn't
put prices in the list as they could change over time.

Verell is constantly adding products, so if you don't see something here,
send him eMAIL:

Verell(at)UnobtainiumSupply(dot)com

Unobtainium takes PayPal sent to: Orders(at)UnobtainiumSupply(dot)com

Or, you can send checks or money orders made out to:

Unobtainium Supply Co.
523 Longley Rd.
Groton, MA
01450

Unobtainium Supply Co.



Part Description Used On
---------------- -------

Bezel, Lever Black, Unbreakable 308GT4, others

Bezel, Lever Chrome Unbreakable Al 308GTS/B,400, others

Cover, Seat Belt Bracket Style A 308, others

Cover, Seat Belt Bracket Style B 308, others

Emblem, '308' Black Chrome Plastic 308

Emblem,308 Black Plastic 308

Knob, Mirror Switch 308 QV

Twist Knob, Headlight 328 & Mondial

Knob, 308 Headlight 308

Knob, 308GT4 Headlight 308GT4

Knob,Disc shaped 308,400, others
(Temp, vent, choke, & switches)

Latch Housing,Boot 308/328

Latch Housing,Bonnet 308/328

Mirror End Cap, Rear, rounded, US Spec. US 308/328

Mirror Front Cap, Trapezoiodal, US Spec.US 308/328

Boot Prop Flex Joint 308

Radiator Bleed Thumb Screw 308, 328 others

EZ Bleed Bolt, Thermostat Housing 308, 328 others
(Thru drilled to bleed without removing!!!)

Shift Shaft Bushing, Delrin (Replaces SilentBloc) 308,328

Cam Gear Locking Tool, 2V 308, Mondial 2-Valve

QA1 Shock Adapter Bushings - 4 wheel set 308, & 328 before s/n: 76626

Paper Weight, QA1 Stretched Eye

Targa Top Rubber Boot 3x8 GTS

Targa Top Latch Rubber Nose restoration:Remove any residue of old rubber
nose, mold a new polyurethane nose. 3x8 GTS



Column(Cluster) Switch Parts
----------------------------
Description Used On

Column Switch Brass U-shaped Contacts 308,328,Mondial, others

Stalk, Headlight
(Chrome Plated shaft) 330 GTC, others
Stalk, Turn Signal
(Chrome Plated shaft) 330 GTC, others
Stalk, Wiper
(Chrome Plated shaft) 330 GTC

Stalk, Turn Signal
(Black shaft) 308/328
Stalk, Turn Signal
(Satin Aluminum shaft) 265 Dino/ 308GT4, others
Stalk, Wiper
(Black shaft) 308/328
Stalk, Wiper
(Satin Aluminum shaft) 265 Dino/ 308GT4, others


Column Switch Services
-----------------------
Services for 265 Dino/ 308/328/Mondial/365 GT4/ 330 GTC, other with similar
switches:

Stalk rebuilding Service (Mold 1 new knob or contact arm on a stalk) You
remove/install stalk.

Stalk rebuilding Service (Mold 1 new knob or contact arm on a stalk) We
remove/install stalk.

Column Switch Full Service & Stalk Repair: Disassemble, check out, clean,
remove tarnish & lube contacts, lube moving parts, polish knobs, clean
lettering & icons. If necessary mold 1 new knob or contact arm on a stalk.

Column Switch FullSvc w/new stalk:As above, but includes one new Wiper or
Turn Signal stalk.

Additional Column Switch repairs are available, they will be charged on a
time & materials basis.

When my right vent control bezel broke, all I could find was used plastic pieces, at ridiculous prices. After receiving two new bezels from Unobtanium, I was so impressed with the quality and finish, I bought the rest of the set. They are WAY better than stock.

The quality is at a minimum equal to stock parts and in most cases a superior part.
Communication and price are also first rate.

There is also a wild rumor that he is working on “noweightium”

Thanks Verell,

chris

 

From another thread, thought I would post the link to the thread/post in case anyone needs a reference.

This is for other AGM (not lead acid) batteries.

http://www.ferrarichat.com/forum/showpost.php?p=137514225&postcount=40

James in Denver

 

I'm not sure if you'll get this msg but anyway, I bought the '79 308 from downeast NC. A sweet deal.
Thanks for your help!
Steve G.
p.s. Darryl talked to me about this one also.

 

Does anyone have the e-mail for Ferrari UK the one I had and Ferrari SPA sent me no longer work. Does anyone know what's going on there, who still working their and their phone numbers now that they are off the owners site??

Thanks

Rob

 

Classic Parts in Egham are still fine and in fact are due to deliver an order to me today - I dealt with Martin whose fax is + 44 1784 436303 - http://www.ferraripart.co.uk/Contact.aspx

http://ferrarichat.com/forum/showpost.php?p=137372649&postcount=33

 

I need part no 60044401 X 2 moon shaped dash vents, for my 79 308GTB,
Tried all usual places, Rytlands, McCann, Ricambi, Ferrari u.k. but seem out of luck, i suppose they are very rare!

 

Brand new LHD and RHD floor undertrays as per original for 308's GTB/S are available from Forza Automotive email Gerry - [email protected]
Cheers MG

 

Recent thread with sources for used parts
http://www.ferrarichat.com/forum/showthread.php?t=225938

 

also try www.ferrparts.com for hard to get parts new and old,every part I ever needed ferrparts has come through for me,and ricambi is great to

 

T. Rutlands has good service/availability.. Also try Motion Products www.mpirestorations.com a-lot of vintage parts

Cheers,

 

Thought I would post some links for cloth braided fuel hoses for a U.S. 85 308 QV for anyone interested.

just did all of my fuel, smog, and vapor hoses recently and used a variety of sources to also retain the cloth covered hose. Here are some links I used for cloth covered hoses in a variety of sizes:

19mm- www.hiperformancestore.com/hosebyfoot.htm

7mm- www.autohausaz.com/

5, 7.5, 10, 15, 19, 22mm- www.newcoproducts.com/new/cohline/hoses.php

6, 9mm- www.pelicanparts.com

16mm Cavis clear hose, 20mm cloth braided hose- www.italiancarparts.com/parts/308.html#hoses

I used non-braided 5/8 fuel hose on the vent tube connectors on the firewall, cloth braided 7.5mm for the cloth vent hose which runs the length of the firewall, and Dave Helms hoses for the filler neck, tank to fuel pump, and crossover hoses at the bottom of the car between the tanks.

Oh, and lastly I bought new steel braided plastic lines from Verrell on the board.

I used the different sources for availability and costs. Hope this helps!

 

This is the map pocket on the back of the passenger seat that has a key lock.
See this thread prior to bidding on e-bay

http://www.ferrarichat.com/forum/showthread.php?t=300694

 

See if this source is still available.

" I use magna flow 28 inch muffler 2 1/2 inlet + outlet. Its all st/ steel, and bolts to OEm muffler brackets, $900 USD + shipp will be about $150. Also have 360 style keys to suit 308 new repo uncut, $90 + $30 shipp, and new dash vents $400 + shipp. If you need anymore in fo drop me a line."

Cheers Rizzo
[email protected]
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login