boxer knockoffs

I puchased mine direct from the manufacturer in Italy for around $125 each I recall. There are different KOs for the front and rear on the 512s, the rears are`called deep as the wings are angled out further for the 9" wheel, the pic you posted is the regular KO for the front wheels but of course was used on all 4 365BB wheels as they used 7.5" rims all around

 

Its been a while I'll try and find it and PM you.

 

Here you go Mark

Re. your earlier inquiry we are pleased to inform you that the BORRANI brand
car wire wheels are manufactured by

COSTRUZIONI MECCANICHE RHO S.p.A./ GIANETTI GROUP
Via Enrico Mattei, 13
20017 Rho (MI)
Italy
Tel: 011/39/02/932651
Fax: 011/39/02/93500328
www.gianettiruote.it/cmr/cmrsoc.htm
e-mail: [email protected])

Sincerely,

Italian Trade Commission, Chicago office


Keep in mind some of the 3 eared KOs had a 3D style Cavallino and others are etched, the Borrani 3 eared KOs are etched


Regards

Jeff

 

Good day Mark,

You could also try Ferrari Parts Exchange:

http://www.ferraripartsexchange.com/wheel%20accessories.htm

Their site does not say if they have the deeper one, but may be worth a call.

Cheers,

Sam

 

Yes the KOs I got from Borrani are etched but they are OE also on new BBs, I think Ferrari used both the raised and etched on BBs, I have seen many 60s Ferraris with etched also, the raised 3D were used less it seems, most parts suppliers I talked to when purchasing the KOs didn't have any in stock, the ones that did wanted $500 each KO vs $125 factory direct for the same etched KO.

 

I looked at the KOs on Reoriginals site and they are etched or engraved as well, they are the same KOs I purchased from Borrani