I need parts | FerrariChat
Buy

I need parts

Discussion in '308/328' started by sc67vette, Feb 28, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. sc67vette

    sc67vette Karting

    Feb 28, 2007
    92
    Dallas, Tx
    Full Name:
    Steve
    #1 sc67vette, Feb 28, 2007
    This is not my first Ferrari, so I should have known better. '79 308 missing a lot of engine parts. I need cams, cam covers, air cleaner, a/c compressor, brackets, cam drive gears and all related parts, distributors, etc. you get the picture. Anybody? Thanks, Steve.
     
  2. Mike328

    Mike328 F1 Rookie

    Oct 19, 2002
    2,655
    Boulder, CO
    Full Name:
    Mike
    #2 Mike328, Feb 28, 2007
    Better call T. Rutlands.

    http://www.trutlands.com/

    1-800-638-1444
     
  3. GrigioGuy

    GrigioGuy Splenda Daddy
    Lifetime Rossa Owner

    Nov 26, 2001
    33,456
    E ' ' '/ F
    Full Name:
    Enzo Gorlomi
    #3 GrigioGuy, Feb 28, 2007
  4. sc67vette

    sc67vette Karting

    Feb 28, 2007
    92
    Dallas, Tx
    Full Name:
    Steve
    #4 sc67vette, Feb 28, 2007
    talked to James @ Norwood, he reccomended Bill @ GT Cars in Phoenix. Talked to him yesterday. Waiting for reply.
     
  5. smg2

    smg2 F1 World Champ
    Sponsor

    Apr 1, 2004
    16,477
    Dumpster Fire #31
    Full Name:
    SMG
    #5 smg2, Mar 1, 2007
    i've got NOS webers and manifolds, sold the cams tho.
     
  6. smg2

    smg2 F1 World Champ
    Sponsor

    Apr 1, 2004
    16,477
    Dumpster Fire #31
    Full Name:
    SMG
    #6 smg2, Mar 1, 2007
    I have a pile of cam drive gears as well. plastic and steel. PM me
     
  7. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,408
    Houston, Texas
    Full Name:
    Bubba
    #7 BigTex, Mar 1, 2007
    Cam covers are matched to the heads and not interchangable????

    Not to be discouraging, or anything.......
     
  8. smg2

    smg2 F1 World Champ
    Sponsor

    Apr 1, 2004
    16,477
    Dumpster Fire #31
    Full Name:
    SMG
    #8 smg2, Mar 1, 2007
    you mean the cam caps right? I know that cam caps are matched and numbered but i've never heard of the cover being that way.
     
  9. sc67vette

    sc67vette Karting

    Feb 28, 2007
    92
    Dallas, Tx
    Full Name:
    Steve
    #9 sc67vette, Mar 1, 2007
    I need cam covers, not cam caps. Cam caps are matched and numbered. Cam covers are just like valve covers.
     
  10. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,288
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #10 Rifledriver, Mar 1, 2007
    Valve covers are machined to the head just like Tex said.
     
  11. smg2

    smg2 F1 World Champ
    Sponsor

    Apr 1, 2004
    16,477
    Dumpster Fire #31
    Full Name:
    SMG
    #11 smg2, Mar 1, 2007
    ahh you're right, the cams poke out thru there and the seals fit between. I would assume you could make another set work, can't be that far off between the engines.
     
  12. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,288
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #12 Rifledriver, Mar 1, 2007
    You would think so but I have seen them swapped and have huge differences in where the rear ends are (like 1/16 step on the gasket surface. Same at the front ends for the seal pockets and O ring grooves.

    It can be a real mess.
     
  13. Argento839

    Argento839 F1 Veteran

    Oct 21, 2005
    9,103
    #13 Argento839, Mar 2, 2007

    GT is amazing... I am so grateful that they are close to home...
     
  14. FasterIsBetter

    FasterIsBetter F1 Veteran

    Jul 22, 2004
    5,856
    NoNJ/Jupiter FL
    Full Name:
    Steve W.
    #14 FasterIsBetter, Mar 2, 2007
    Forget about replacing the distributors. Get the Electromotive XDI system from Nick's Forza Ferrari. It will cost you a lot less than a pair of distributors, and comes complete with everything you need to set it up. Plus, you then have an electronic ignition system that is incredibly reliable, without the hastle of the dual points in two distributors, etc. And then have Wade make up a couple of end plates to cover where the distributors would mount, and a bracket for the coils.
     
  15. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,408
    Houston, Texas
    Full Name:
    Bubba
    #15 BigTex, Mar 2, 2007
    Thanks for the back up! LOL!

    I thought I had read that somewhere........Ferrari of Atlanta had two new distribs on the shelf once, $800 USD each.......

    I wasn't sure mine were coming back, when TRutland'***** a rough patch there for awhile.....this was years ago.
     
  16. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,408
    Houston, Texas
    Full Name:
    Bubba
    #16 BigTex, Mar 2, 2007
    My distribs only have one set of points.....now...:rolleyes:
     
  17. 4re308

    4re308 F1 Rookie
    Silver Subscribed

    Jun 13, 2001
    4,903
    Woodstock, GA
    Full Name:
    Mitch D
    #17 4re308, Mar 2, 2007
  18. 2NA

    2NA F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 29, 2006
    18,221
    Twin Cities
    Full Name:
    Tim Keseluk
    #18 2NA, Mar 2, 2007
    So much for interchageability. An opportunity for a "Field Modification".

    Bound to be better than the fabled "Fiero Modification" that we've seen here.
     
  19. sc67vette

    sc67vette Karting

    Feb 28, 2007
    92
    Dallas, Tx
    Full Name:
    Steve
    #19 sc67vette, Mar 3, 2007
    ttt
     
  20. hanknum

    hanknum Formula 3

    Nov 1, 2003
    2,050
    Santa Barbara
    Full Name:
    Henry
    #20 hanknum, Mar 3, 2007
    I bought Scott's cams, so my originals may be available. PM me for specifics.

    Henry
     
  21. sc67vette

    sc67vette Karting

    Feb 28, 2007
    92
    Dallas, Tx
    Full Name:
    Steve
    #21 sc67vette, Mar 7, 2007
    Bill @ GT Cars will not call me back. I'm done with him. Danny @ Boardwalk says he has become more than a little lax in returning calls. Still need parts.
     

Share This Page