Is 430 oil change similar to 360? | FerrariChat

Is 430 oil change similar to 360?

Discussion in '360/430' started by rscholl, Apr 23, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. rscholl

    rscholl Formula Junior

    Joined:
    Dec 4, 2003
    Messages:
    296
    Location:
    Houston,TX
    Is the procedure the same? Are the drain plugs the same size? Oil filter size? The filter is in a different position, much lower. Can it be reached from the top without removing the undertray? Thanks.
     
    rscholl, Apr 23, 2007
    #1
  2. rscholl

    rscholl Formula Junior

    Joined:
    Dec 4, 2003
    Messages:
    296
    Location:
    Houston,TX
    bump
     
    rscholl, Apr 24, 2007
    #2
  3. henkie

    henkie La Passione... Lifetime Rossa

    Joined:
    Apr 13, 2005
    Messages:
    10,516
    Location:
    Deil,The Netherlands
    Full Name:
    henkie
    Nobody seems to have a 430 :rolleyes:
     
    henkie, Apr 25, 2007
    #3
  4. PAP 348

    PAP 348 Ten Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2005
    Messages:
    100,220
    Location:
    Mount Isa, Australia
    Full Name:
    Pap


    With most/all 430's still under warranty, owners are still getting oils changed at dealerships. :) When they all come out of warranty, then more owners will be changing their own oils. Well............thats what I reckon anyways. :):)
     
    PAP 348, Apr 25, 2007
    #4
  5. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,448
    Location:
    Winston Salem, NC
    Filter is the same size, but *not* the same part. Do NOT use a 197654 oil filter.

    Filter - 200595 (looks very similar to 360 filter and same dimensions -- but different specs)

    Case drain plug - 104280

    Case crush washer - 10261860

    Gearbox housing drain plug - 10276140

    Gearbox housing crush washer - 10265060

    Gearbox housing gasket thing-a-ma-bob - 207541

    Mesh filter - 122429

    O-ring above mesh filter - 190183

    This might be of some assistance:
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    Ricambi America, Apr 25, 2007
    #5
  6. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,448
    Location:
    Winston Salem, NC
    Ricambi America, Apr 25, 2007
    #6
  7. henkie

    henkie La Passione... Lifetime Rossa

    Joined:
    Apr 13, 2005
    Messages:
    10,516
    Location:
    Deil,The Netherlands
    Full Name:
    henkie
    Great info, as ever !
     
    henkie, Apr 25, 2007
    #7
  8. PAP 348

    PAP 348 Ten Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2005
    Messages:
    100,220
    Location:
    Mount Isa, Australia
    Full Name:
    Pap
    Nice work Daniel :):):)
     
    PAP 348, Apr 25, 2007
    #8
  9. rscholl

    rscholl Formula Junior

    Joined:
    Dec 4, 2003
    Messages:
    296
    Location:
    Houston,TX
    Daniel,
    Thanks for the great write-up and for posting the service manual pics. That helps. Does the 360 have the same setup with the mesh screen and O-ring on the gearbox housing?

    Are the hex-sockets I used for my 360 the same size as on the 430? Also, same size filter wrench, which I already have?

    Is the oil cartridge reachable from the top without removing the undertray?

    Thanks again!
     
    rscholl, Apr 25, 2007
    #9
  10. Eijiboy

    Eijiboy Rookie

    Joined:
    May 5, 2006
    Messages:
    33
    nice info! probably much easier than 360 cuz oil filter is wide open down the engine.
     
    Eijiboy, Apr 25, 2007
    #10
  11. dsevo

    dsevo Formula Junior

    Joined:
    May 7, 2007
    Messages:
    708
    Location:
    Flower Mound, TX
    Full Name:
    Dustin
    What oil do you guys use? Is 0w-40 OK? I've been keeping my eyes open for 5w-40 but haven't found it. Thanks.
     
    dsevo, May 31, 2007
    #11
  12. dclimo

    dclimo Rookie

    Joined:
    Feb 17, 2007
    Messages:
    44
    Quality info , thumbs up
     
    dclimo, Jun 1, 2007
    #12
  13. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,448
    Location:
    Winston Salem, NC
    Tech update:

    At the request of Ferrari, F430 oil filter 200595 has been pulled from inventory. Correct filter for 430 is now 234742, which is about half the height of the old one, but the same cap wrench (OFT-02) will work on it.

    Obviously, there was a problem with the old filters and Purflux & Ferrari are serious about torque specs. Additionally, rubber seal on the bottom of the filters has been changed from a rounded seal to a squared seal.

    Oil filter cap wrench:
    http://www.ricambiamerica.com/product_info.php?products_id=261231

    New oil filters:
    http://www.ricambiamerica.com/product_info.php?products_id=261638
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    Ricambi America, Jun 1, 2007
    #13

Share This Page