will a set of 360 wheels fit my 355?

No

 

Ratler,
Did you get any help with this question? If you are new and do a search for 355 wheels you will find tons of reading. Try this out.

crash

 

Depends. Best bet is to get a hold of the offset data for said wheels, and compare them to the OE 355 values. The latter is listed on a thread here I started a while back.

 

They will not work unless you feel comfortable having the hub shaved.

 

Not necessarily. If they aftermarket wheels needed spacers to properly work on the 360, there is a chance (slim) they would work on the 355 sans the spacers.

 

The offset for the 355 is 78, and 39 for the 360........If you think they made a 39mm spacer to work on a 360, well ok then..........

 

I did say slim, and I have seen some strange aftermarket offerings.

In theory they may need only a 20mm spacer, which is not unheard of, and in which case they might work (even if they stick out 20mm more then OE)