brake bleed procedure | FerrariChat
Buy

brake bleed procedure

Discussion in '348/355' started by Lars_vet, Jun 25, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Lars_vet

    Lars_vet Formula Junior

    Feb 25, 2007
    603
    On the open road
    Full Name:
    Lars
    #1 Lars_vet, Jun 25, 2007
    In addition to my "oil change procedure" thread, I have some questions on brake bleeding on my 348.

    I want to change my fluid to DOT 5.1, before an upcomming track event. I use the old "2 guy- pump the pedal"- method

    Since the bleed valves are visible thru wheels, is there any need to jack up the car when bleeding the brakes?

    How much fluid do I need to buy for a brake bleed?

    I what order do I bleed the wheels?


    Is there anything speciel to notice when doing a brake bleed on a 348?


    best reagrds
    Lars
     
  2. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    #2 gothspeed, Jun 25, 2007
    You can do it through the wheels, just make sure the hose on the nipple does not pop off ;)!!
     
  3. Lars_vet

    Lars_vet Formula Junior

    Feb 25, 2007
    603
    On the open road
    Full Name:
    Lars
    #3 Lars_vet, Jun 25, 2007
    In what order do I bleed the wheels?


    Dot 5.1 is ok for the car right?
     
  4. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    #4 gothspeed, Jun 25, 2007
    Old school of thought is do the wheel furthest from the Master Cylinder first, then the second furthest etc..... I would use the same stuff the factory calls out for in the manual. Sometimes newer modern fluids are not compatible with our older technology hydraulic seals... in other words may cause premature leaks or failure of seals.....
     

Share This Page