Zymol-i have a question on "Ital" wax | FerrariChat

Zymol-i have a question on "Ital" wax

Discussion in '360/430' started by billy721, Jul 11, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. billy721

    billy721 Rookie

    Apr 23, 2005
    49
    Hong Kong
    Full Name:
    Billy
    Hiya,

    I use "Carbon" before. You can wax the whole car and then buff it off. It give a very very smooth and oily layer on the car.
    But with "Ital", It need to buff off in 30-50 seconds, and none of the above-mentioned touch on the paint. Is this normal for this particular class of their wax?

    Many thanks.

    Billy
     
  2. E60 M5

    E60 M5 Moderator
    Moderator Owner

    Jan 2, 2006
    8,166
    Wash DC area
    Full Name:
    Robert
    Billy,
    I see you are in HK, I know someone in the states that could have helped you, he is a authorized Zymol dealer.
    I only use the "estate glazes" never had this problem, sorry.

    Did you try www.zymol.com?

    Robert
     
  3. Carnut

    Carnut F1 Rookie

    Nov 3, 2003
    3,797
    Gladwyne PA
    Full Name:
    Morrie
    I have used that wax, and yes it is normal. A pain to use since you really need to use your hands to get to work right.
     
  4. billy721

    billy721 Rookie

    Apr 23, 2005
    49
    Hong Kong
    Full Name:
    Billy
    i was meaning the "oily look, and slippery touch " on the paint.

    The "ital" does not feel the same as the "carbon" on their finishing touch.

    Is this normal?

    Thanks again

    Billy
     
  5. RayJohns

    RayJohns F1 Veteran
    Silver Subscribed

    May 21, 2006
    7,926
    West Coast
    Full Name:
    Ray
    The carbon version sounds great to me.. why change? Does the carbon one leave any white if it dries in cracks, etc? I use their leather products and have been looking for a good car wax to replace what I have been using.

    Ray
     

Share This Page