360 FIRE EXTINGUISHER PLACEMENT | FerrariChat

360 FIRE EXTINGUISHER PLACEMENT

Discussion in '360/430' started by PhilNotHill, Jul 18, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. PhilNotHill

    PhilNotHill Two Time F1 World Champ Owner

    Joined:
    Jul 3, 2006
    Messages:
    27,855
    Location:
    Aspen CO 81611
    Full Name:
    FelipeNotMassa
    Doing a track event next month. We are required to have a fire extinguisher on board readily accessible in the cockpit.

    Any suggestions on where to locate and how to install would be appreciated. 360 F1 Spider.

    Thanks in advance
     
  2. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,448
    Location:
    Winston Salem, NC
    In the passenger footwell, along the center tunnel would be my first choice.
     
  3. fc2

    fc2 F1 Veteran Owner

    Joined:
    Nov 2, 2006
    Messages:
    5,263
    Location:
    Silicon Valley Ca.
    Full Name:
    Frank C.
    +1

    This is where Ferrari mounts them when you order the extinguisher option from the factory on both 360's and 430's.

    Frank
     
  4. paulie_b

    paulie_b F1 Veteran Consultant Owner

    Joined:
    Jan 13, 2003
    Messages:
    6,842
    Location:
    Jupiter, FL
    Full Name:
    Paul Bianco
    another option: behind one of the seats within reaching distance.
     
  5. Roughneck

    Roughneck Karting

    Joined:
    Aug 2, 2005
    Messages:
    240
    Ferrari installed mine behind the passenger seat as in the footwell the carpet has to be cut.
     
  6. Modenafan

    Modenafan F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 19, 2004
    Messages:
    12,069
    Location:
    Moorpark
    Full Name:
    Jon
    I had Ferrari install one in my 360 behind the driver on that little ledge. My CS is mounted on the passenger floor.
     
  7. fatbillybob

    fatbillybob Two Time F1 World Champ Consultant Owner

    Joined:
    Aug 10, 2002
    Messages:
    28,991
    Location:
    socal
    The easiest mounts are U shaped bracket in passenger footwell connected to the front seat mount bolts. no cutting involved and you can weld it up in about 10 minutes. Remember to use metal quick release straps not plastic so the extinguisher does not become a projectile in your car from a crash.
     
  8. hardsports

    hardsports Karting

    Joined:
    Jul 2, 2004
    Messages:
    140
    Location:
    St. Louis
    Full Name:
    Brett
    I put mine behind the passenger seat on the shelf. I was told there isn't a plate under the floor to anchor the brackets in the passenger footwell unless you specified the factory option and that if you mount it where the factory does, you have to remove the brackets to access the battery. But.... the shelf where they mounted it behind the seat is flexing just a little too much for comfort for track events. I really don't need a 7lb projectile flying around the cockpit in a bad crash...... Then again, that could happen anytime now that I think about it.........
     
  9. hardsports

    hardsports Karting

    Joined:
    Jul 2, 2004
    Messages:
    140
    Location:
    St. Louis
    Full Name:
    Brett
    Wow... while I was typing, you and I said the same thing.......
     
  10. Skidkid

    Skidkid F1 Veteran Owner Rossa Subscribed

    Joined:
    Aug 25, 2005
    Messages:
    9,520
    Location:
    Campbell, CA
    Full Name:
    John Zornes
    My car has a fairly small halon extinguisher mounted on the tunnel between the foot wells. It realy looks pretty cool there. I can post a pic later. The previous owner tracked the car so I suspect that it complies.
     
  11. Hubert888

    Hubert888 F1 Veteran BANNED

    Joined:
    May 14, 2003
    Messages:
    5,441
    Location:
    Manhattan & LA
    Full Name:
    Hubert
    P-Factor custom-made me a fire extinguisher mount. They put my extinguisher horizontally in front of the passenger seat with a custom fabricated & mounted aluminum bracket which moves with the passenger seat back and forth

    no drilling holes required...probably the best way to mount IMO
     
  12. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,448
    Location:
    Winston Salem, NC
    Here's what we're working with.

    These look like they'll work fantastically for mounting on a parcel shelf, rear wall, luggage compartment, etc. Still need to play with it, as I pretty much scuffed/scratched one brand new cylinder trying to get the proper fit. (If anybody wants a Halon 1211 2.5# cheaply, PM me... scuffs/scratches are no additional charge!!)

    The band is held into the mounting brace with a quick release pin. The whole assembly is billet aluminum, and not for the faint of heart. It is extremely solid, and the appearance is dead sexy. The stain/brushed aluminum matches a Ferrari gear gate beautifully. These have an NHRA approval already from the manufacturer. Pricing TBD.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017

Share This Page