Tonneau For Mondial? | FerrariChat

Tonneau For Mondial?

Discussion in 'Mondial' started by kdave1031, Jul 31, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. kdave1031

    kdave1031 Rookie

    Joined:
    Nov 3, 2003
    Messages:
    35
    Location:
    Springfield, Mo
    Full Name:
    David Mitchem
    I have Some canvas covers, and I think they are tonnoeu's For a Mondial. Did they make these?
     
  2. kdave1031

    kdave1031 Rookie

    Joined:
    Nov 3, 2003
    Messages:
    35
    Location:
    Springfield, Mo
    Full Name:
    David Mitchem
    Last edited by a moderator: Sep 7, 2017
  3. SonomaRik

    SonomaRik F1 Veteran

    Joined:
    Dec 15, 2006
    Messages:
    6,904
    Location:
    Folsom, CA (formerly Sonoma)
    Yes, I had one of these and sent it off to a souther CA top maker...HE's taking his sweet time...but haven't paid him anything either.

    This is NOT a tonneau cover. IT is a standard Mondial cabriolet cover used for shipping from the factory and is discarded upon delivery.

    It truly has no worth, as you have found out.

    The side, elastic pices go in the handle areas, and the rear, I believe went under the rear engine cover.

    The front items under and about the front, trunk lift area where you lifted the trunk and dropped it on the inserted strips.

    This item, which looks like you might have acquired it with the car or on ebay should be sent back to seller if purchased or, well, just kept as an oddity.

    There IS a link I can send you for a true leather or canvas toneau cover, and there is a FOC member that sells them, but it didn't fit well., thus my NEW pattern sent to SoCAL.
     
  4. kdave1031

    kdave1031 Rookie

    Joined:
    Nov 3, 2003
    Messages:
    35
    Location:
    Springfield, Mo
    Full Name:
    David Mitchem
    Hmm Very Interesting info. I have 2 of them, and I am assuming they came in a couple of cars we had sold, and it was taken out and never put back in. i guess if anyone has any interest in them, let me know.
     
    Carmelo Cesar Laise likes this.
  5. SonomaRik

    SonomaRik F1 Veteran

    Joined:
    Dec 15, 2006
    Messages:
    6,904
    Location:
    Folsom, CA (formerly Sonoma)
    they are kinda of cool. they have leather elastic cords, which is a LOT of expense etc. Ferrari went to a lot of expense to guard their tops in shipment for that day's technology....afterall, the Mondial T was listed about $100,000 when it first came out about 18 years ago!!!!!!

    you would expect champagne for that too.

    anyway, what you have is becoming much more rare. The local Ferrari dealership mentions they have 'bunches' of them, and I expect them to just be discarded someday......


    KEEP them, they will become the 'full concorse package' someday...

    BTW: Mondial T's luggage is the most expensive produced by Ferrari for ANY car to date: over $7,000 Euros!!!!! and that is for 7 items which is the most too. Also, that doesn't include shipment, tax etc.
     
    ronfrohock likes this.
  6. altaman

    altaman Karting

    Joined:
    Feb 25, 2005
    Messages:
    68
    Location:
    michigan
    Full Name:
    BRYAN

    are you talking about a cover for the interior while the top is down. I would have an interest in this as I would park the car with the top down and want some security
     
  7. Vivaldi

    Vivaldi Karting

    Joined:
    Aug 1, 2001
    Messages:
    83
    Location:
    SoCal
    Full Name:
    Alex Vivaldi
    The pictures are of a quasi-tonneau cover used to protect the interior of the Mondial Cabriolet from inclement weather (sun, etc.) by the owner (not just for shipping). They are rather cumbersome to put on but serve the purpose rather well once installed. Going rate is $300 and up (I paid $350 for mine from an eBay private seller). Also, I believe they came in a pouch (which unfortunately I did not get).
     
  8. SonomaRik

    SonomaRik F1 Veteran

    Joined:
    Dec 15, 2006
    Messages:
    6,904
    Location:
    Folsom, CA (formerly Sonoma)
    NO, a toneua[sic] is NOT what he has, but a SHIPPING cover to keep the TOP UP clean... if he were to put the top up, then put this cover on, it would cover the major portion of the windshield, the top and some of the rear window area.....
    the side straps gave it some play, the leather, cheap for them, was a means to get LESS friction on side portions.

    ACTUALLY, wouldn't mind getting one again....sort of gives me the full set.

    I have designed and being made in SoCal a true toneau cover for the Mondial Cabriolets, old 208,328 or 348 models...all basically the same. IT has aftermarket, real snaps to be used on the rear boot area, so there are NO straps..that maker has them in crome or black plastic...Believe I am going to use black on mine for cost and get some replacement ones should some bite the dust later in my life :|

    I also have redesigned the front piece to go UNDER the front lid, such, that when the lid is closed it covers the entire windshield area.

    I have side straps that go with velcro in the door handles and around the side mirrors [velcro too]...I have, but not decided, to install a velcro piece for the drivers areas, such that when I park, I can quickly undo the driver's side from the windshield and cockpit area for re-park/position the car out of, say, the sun. This way I wouldn't have to undo the entire toneau just the driver's area.

    MY goal was not a driveable cover with the top down. but, when I drive a distance, and used to put the cover over the car [my top doesn't go up :) ], I wanted to keep leaves, dust, sun off the leather....BUT, when I covered the leather and the DIF'cult rear leather boot area, it made it dirty....mostly due to engine 'dust' after a long drive....

    SO: wanted something that covered all the leather to the rear stranged shaped top cover, and left the engine slats open for cooling.

    :)

    I could have this made in leather but that defeated the purpose, so, choose a washable canvas, and asked for insight into a reflective type material....still being developed...good thing is, this will fit the entire cockpit, AND rear top cover AND windshield.....

    will keep you updated.
     
    ronfrohock likes this.
  9. SonomaRik

    SonomaRik F1 Veteran

    Joined:
    Dec 15, 2006
    Messages:
    6,904
    Location:
    Folsom, CA (formerly Sonoma)
    not quite a true tonneau cover in that you CANNOT drive with the one shown. The cover shown is covers the side windows and front and rear portions of the windows: cannot drive when the upper portions of the front and rear windows are covered....just put one on and try it...doesn't work.
     
  10. kdave1031

    kdave1031 Rookie

    Joined:
    Nov 3, 2003
    Messages:
    35
    Location:
    Springfield, Mo
    Full Name:
    David Mitchem
    So do you guys have any interest for them? i dont need them. I would like to sell them. maybe $75 a piece?
     
  11. ronfrohock

    ronfrohock F1 Rookie Owner Rossa Subscribed

    Joined:
    Aug 16, 2004
    Messages:
    4,154
    Location:
    MA
    Full Name:
    Ron Frohock
    And I use it regularly when I park my car with the roof down. Its helpful in keeping the interior clean, reduces sun exposure and is easy to use. I also have been asked if I have it when being judged. I would get one if you dont have one!
    - Ron
    Ps. I still have Roof Toggles available.........
     
  12. D.Mauro

    D.Mauro Formula 3

    Joined:
    Jun 18, 2006
    Messages:
    1,266
    Location:
    Cumming/ Hlwd Fl
    Full Name:
    Dominick
    Dave I sent you a pm.
     
  13. kdave1031

    kdave1031 Rookie

    Joined:
    Nov 3, 2003
    Messages:
    35
    Location:
    Springfield, Mo
    Full Name:
    David Mitchem
    i also have a Mondial Car Cover, it is on ebay right now, if you guys are interested in it. Thanks For the Info on the Top, and the Help to get rid of them.
     
  14. NYCFERRARIS

    NYCFERRARIS Formula 3

    Joined:
    Mar 2, 2004
    Messages:
    1,011
    curious if they used the same cover or if teh one for the mondial T was wider in some way... I would love a real tonneau cover but curious how you would attach infront do I have to insert snaps along the front dorrs and dash like british roadsters?
     
  15. Vivaldi

    Vivaldi Karting

    Joined:
    Aug 1, 2001
    Messages:
    83
    Location:
    SoCal
    Full Name:
    Alex Vivaldi
    SonomaRik is correct in stating it is not a true tonneau cover. That is why is I labeled it as a "quasi"-tonneau cover. It has the same general shape, but is only useful for protecting the interior leather and such from damaging sun, keeping debris out, etc. when the car is parked with the top down. Didn't mean to confuse and imply that you could drive with it. And to avoid follow-up emails from the purists, yes it doesn't have the exact tonneau shape, since it does cover about the top half of the windshield, makes opening the doors impossible by hooking onto the outside mirrors, etc.

    In any event, $75 is a bargain. Whoever needs one, grab it.
     
  16. NYCFERRARIS

    NYCFERRARIS Formula 3

    Joined:
    Mar 2, 2004
    Messages:
    1,011
    a pm verified that they are all gone....anyone have a pattern to start sewing some?
     
  17. Carmelo Cesar Laise

    Carmelo Cesar Laise Rookie

    Joined:
    Oct 24, 2019
    Messages:
    6
    Location:
    Buenos Aires- ARGENTINA
    Full Name:
    Carmelo Cesar Laise
    Hi guys! Hello from Argentina! do you know who could have a Mondial QV Cabriolet 1984 tonneau? King regards!
     
  18. Alden

    Alden F1 Rookie Rossa Subscribed

    Joined:
    Apr 25, 2010
    Messages:
    3,601
    Location:
    Central Florida
    Our own Hank Sound (Hank Garfield) used to make a rip stop nylon "spider cover" for our cars and other Ferrari cabriolets, Ricambi distributed them, sadly Hank is gone now and Daniel at Ricambi has none left for Mondials, maybe a few for 348's.
    I have one.
    Alden
    View attachment 2086230
     

    Attached Files:

  19. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,448
    Location:
    Winston Salem, NC
    @Alden correct. I have 1 x 348 "Spider Top" remaining. It might fit a 355, but it certainly won't work on a Mondial.
     
    ronfrohock likes this.
  20. SonomaRik

    SonomaRik F1 Veteran

    Joined:
    Dec 15, 2006
    Messages:
    6,904
    Location:
    Folsom, CA (formerly Sonoma)
    moysiuan likes this.

Share This Page