A/C Console | FerrariChat

A/C Console

Discussion in '348/355' started by fxdwgs, Aug 15, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. fxdwgs

    fxdwgs Formula 3

    Joined:
    Aug 22, 2006
    Messages:
    1,016
    Location:
    Sjobo, Sweden
    Full Name:
    Bengt
    Just taken that crap apart again for the 5th time. I have come to the conclusion there is nothing wrong with the electronics, it has to be in the cables supporting the fan assembly.
    Have to look into that some other day though.
    For those of you who want to see what that console looks like inside here are a few shots.
    Please not the electronic engineer who I used as consultant.......the last picture.

    //B//
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    fxdwgs, Aug 15, 2007
    #1
  2. 285ferrari

    285ferrari Two Time F1 World Champ Sponsor

    Joined:
    Sep 11, 2004
    Messages:
    20,973
    Location:
    MD and NE
    Full Name:
    Robbie
    Your consultant would cetainly have a better guess than me for what is the problem..
     
    285ferrari, Aug 15, 2007
    #2
  3. No Doubt

    No Doubt Seven Time F1 World Champ

    Joined:
    May 21, 2005
    Messages:
    72,740
    Location:
    Vegas+Alabama
    Full Name:
    Mr. Sideways
    Is that a Bosch part number that I see on one PCB?
     
    No Doubt, Aug 15, 2007
    #3
  4. Armenhaz

    Armenhaz Karting

    Joined:
    Nov 8, 2005
    Messages:
    232
    Location:
    Glendale, CA
    Full Name:
    Armen
    Did your A/C console just come off the face plate? MY A/C console seems to be stuck (seems like it was glued on?), and I am afraid of pulling on it b/c the face plate seems so flimsy, it might break.
     
    Armenhaz, Aug 15, 2007
    #4
  5. Chiaro_Slag

    Chiaro_Slag F1 Veteran

    Joined:
    Oct 31, 2003
    Messages:
    7,789
    Location:
    CA
    Full Name:
    Jerry
    Kitty is in ur Pherrari phukin with da A/C n' chit.
     
    Chiaro_Slag, Aug 15, 2007
    #5
  6. glpellegrino

    glpellegrino Karting

    Joined:
    Oct 21, 2005
    Messages:
    85
    Location:
    Eastern Mass
    Full Name:
    Greg
    My clock buttons recently broke loose inside and I had to take it apart to put the screw holding the internal LED backcover back in. The console is held to the face with a gummy double sided gasket that breaks loose with consistent but gentle pressure from a thin blade or screw driver. Be careful...the faceplate is very thin and I imagine easy to break with too much pressure in one place. Came apart pretty easy once I figured out it wasn't actually glued.
     
    glpellegrino, Aug 15, 2007
    #6
  7. PAP 348

    PAP 348 Ten Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2005
    Messages:
    100,224
    Location:
    Mount Isa, Australia
    Full Name:
    Pap


    Lol!!! :):)
     
    PAP 348, Aug 15, 2007
    #7
  8. potxoli

    potxoli Formula 3

    Joined:
    Mar 22, 2007
    Messages:
    1,716
    Location:
    Washington DC
    Full Name:
    Eric B.
    +1. Kitty needs to go :) :)
     
    potxoli, Aug 15, 2007
    #8
  9. fxdwgs

    fxdwgs Formula 3

    Joined:
    Aug 22, 2006
    Messages:
    1,016
    Location:
    Sjobo, Sweden
    Full Name:
    Bengt
    What is a PCB???

    //B//

     
    fxdwgs, Aug 16, 2007
    #9
  10. fxdwgs

    fxdwgs Formula 3

    Joined:
    Aug 22, 2006
    Messages:
    1,016
    Location:
    Sjobo, Sweden
    Full Name:
    Bengt
    Yep it is glued on.........however it came off nice. It is glued on top and bottom............not on the sides and not in between.

    //B//


     
    fxdwgs, Aug 16, 2007
    #10
  11. fxdwgs

    fxdwgs Formula 3

    Joined:
    Aug 22, 2006
    Messages:
    1,016
    Location:
    Sjobo, Sweden
    Full Name:
    Bengt
    She is not phukin around.......merely keeping me company. Guess she understands as much as I do of this A/C working only when it decides to.

    //B//


     
    fxdwgs, Aug 16, 2007
    #11
  12. fxdwgs

    fxdwgs Formula 3

    Joined:
    Aug 22, 2006
    Messages:
    1,016
    Location:
    Sjobo, Sweden
    Full Name:
    Bengt
    Might be more correct to explain it this way. There was a thin string of sticky "material" which I translated as glue. Probably is some kind of tape though. Sorry.

    //B//


     
    fxdwgs, Aug 16, 2007
    #12
  13. No Doubt

    No Doubt Seven Time F1 World Champ

    Joined:
    May 21, 2005
    Messages:
    72,740
    Location:
    Vegas+Alabama
    Full Name:
    Mr. Sideways
    Printed circuit board...the large green objects!
     
    No Doubt, Aug 16, 2007
    #13
  14. fxdwgs

    fxdwgs Formula 3

    Joined:
    Aug 22, 2006
    Messages:
    1,016
    Location:
    Sjobo, Sweden
    Full Name:
    Bengt
    PCB in this country means something very toxic. PCB in water is dangerous for the fish industry. A cod poisoned with PCB looks like something else....completely.

    Which number is a Bosch number?

    //B//


     
    fxdwgs, Aug 16, 2007
    #14
  15. Chiaro_Slag

    Chiaro_Slag F1 Veteran

    Joined:
    Oct 31, 2003
    Messages:
    7,789
    Location:
    CA
    Full Name:
    Jerry
    :)

    Just kidding around. I like the pic of the kitty. I'm not so fond of the 348 A/C Italian craftsmanship.
     
    Chiaro_Slag, Aug 16, 2007
    #15
  16. wingfeather

    wingfeather F1 Rookie

    Joined:
    Feb 1, 2007
    Messages:
    3,653
    Location:
    rock bottom
    Last edited by a moderator: Sep 7, 2017
    wingfeather, Aug 16, 2007
    #16

Share This Page