3.2 Mondial Gearbox oil leak problem | FerrariChat

3.2 Mondial Gearbox oil leak problem

Discussion in 'Mondial' started by stan122, Oct 19, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. stan122

    stan122 Rookie

    Oct 19, 2007
    6
    Does anyone in Ferrari land have knowledge on how to repair the seal for the gearbox selector rod on the gearbox on a 87 Ferrari Mondial Cab? Any advice before I get started will be fantastic.
     
  2. docweed

    docweed Formula Junior

    Dec 8, 2004
    452
    Morgantown,WV
    Full Name:
    Chuck Stewart
    Stan
    I've been checking your thread because I to would like some info on replacing that seal. Mine started to leak when I changed my gear oil to Redline. My car is a 79 308 but maybe they are the same or simular. Anyway lets throw this thread out there again to see if anyone has some info.
     
  3. 4redude

    4redude Formula Junior

    Jan 13, 2005
    726
    Fungus Corner
    Full Name:
    Brian Keegan
    I am not exactly sure how the shift rod is removed from the gearbox, but I do know you need to remove both sump pans to do the job. The 1979 308 will take 2 O-rings 105558 for shift shaft seals, while the 1987 Mondial takes 2 of p/n 115372 seals. The gbx sump gasket (larger) is 147675 and the engine sump gasket (smaller) is 147676. Also, put the shift lever into second gear before you begin. I remember this being important for re-assembly and alignment/adjustment of the linkage.
    Good Luck.
     
  4. docweed

    docweed Formula Junior

    Dec 8, 2004
    452
    Morgantown,WV
    Full Name:
    Chuck Stewart

    Thanks
    Now at least I have some idea what I'm up against.
     
  5. stan122

    stan122 Rookie

    Oct 19, 2007
    6
    Thanks for this reply, should make the job a little easier.
     
  6. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,035
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    Did you try a search on "308 shift shaft"? Should get you a lot of good threads with pics.
     

Share This Page