Problem!!!! Help!!! | FerrariChat

Problem!!!! Help!!!

Discussion in 'Collectables, Literature, & Models' started by fiorano94, Oct 30, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. fiorano94

    fiorano94 F1 Veteran

    May 26, 2006
    6,892
    MW/NW/SE
    #1 fiorano94, Oct 30, 2007
    Alright, so last night out of boredom i saw that my CS model had crappy paint while i was looking at it.

    Its the Hotwheels 1/18 "CS" wannabe.

    My goal is to go over it with flat black paint.

    Now here's the problem.

    I get every screw out of the bottom but one...

    The screw is pretty much stripped.

    What can i do!!?!?!
     
  2. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,212
    Houston, Texas
    Full Name:
    Bubba
    #2 BigTex, Oct 30, 2007
    Carefully drill the head off, if you cannot grasp the edges with pliers.
     
  3. fiorano94

    fiorano94 F1 Veteran

    May 26, 2006
    6,892
    MW/NW/SE
    #3 fiorano94, Oct 30, 2007
    It's the screw at the very back.

    I drilled into the plastic to make the opening a 1/4 of an inch.

    I can fit regular dill bits in there now.

    Anything else that i could try?
     
  4. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,845
    Southern Md
    Full Name:
    Robbie
    #4 285ferrari, Oct 30, 2007
    Palmer---a couple pics may help us see exactly what you mean..
     

Share This Page