HELP! need very large vinyl SF badge | FerrariChat
Buy

HELP! need very large vinyl SF badge

Discussion in 'Ferrari Discussion (not model specific)' started by 400iGuy, Nov 1, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 400iGuy

    400iGuy Formula 3
    Owner Silver Subscribed

    Aug 26, 2004
    1,080
    Central Florida
    Full Name:
    Al
    #1 400iGuy, Nov 1, 2007
    We’ve all seen very large vinyl SF shields stuck on trailers, trucks, garage walls, garage floors, etc. I have had absolutely no success in finding anything larger than a fender sized shield. I’m looking for a BIG one (about 5’ feet long). Anyone out there have any suggestions on where I might find one?

    Also, there is a local sign shop that can make one but I need an hi res jpeg of the shield. Anyone have one of those.

    I’m in the middle of a garage renovation (more like knock it down and build it new) project and I’d like to put a shield on the floor during the epoxy installation process.

    Any help would be greatly appreciated.

    400iGuy
     
  2. BorisSF

    BorisSF Formula Junior

    Aug 22, 2007
    283
    Chicago
    #2 BorisSF, Nov 1, 2007
    Last edited by a moderator: Sep 7, 2017
  3. wetpet

    wetpet F1 World Champ
    BANNED

    May 3, 2006
    10,210
    #3 wetpet, Nov 1, 2007
    thanks.
     
  4. 400iGuy

    400iGuy Formula 3
    Owner Silver Subscribed

    Aug 26, 2004
    1,080
    Central Florida
    Full Name:
    Al
    #4 400iGuy, Nov 1, 2007
    BorisSF,

    Thank you very much.... maybe I'll put one of each on the floor!

    Al
     
  5. LongJohnSilver

    LongJohnSilver Formula Junior

    Apr 15, 2006
    390
    Gainesville FL
    Full Name:
    Scott
    #5 LongJohnSilver, Nov 1, 2007
    Is this the logo you want?

    http://www.turbomonster.com/VectorArt/Originals/Ferrari-Emblem.jpg

    There is an .eps for that logo and a few others here. This is a vector format that can be made into any size jpeg without losing quality. The sign shop should be able to use this format (they will probably prefer it). If not, I or someone else will be able to make a very large jpeg for you.
     
  6. rmnunez

    rmnunez Rookie

    Aug 8, 2005
    49
    Carlsbad
    Full Name:
    Robert nunez
    #6 rmnunez, Nov 1, 2007
  7. Gemm

    Gemm Formula 3

    Aug 19, 2005
    1,163
    Essex, England
    #7 Gemm, Nov 2, 2007
    I've made one for you. 9000x9000px JPEG (3.3mb). This should be enough for 5ft image (at 150ppi). If you need anything larger, just let me know. ;)

    http://www.sendmefile.com/00591951
     
  8. turbo9441

    turbo9441 Rookie

    Aug 20, 2006
    13
    Tennessee
    #8 turbo9441, Nov 11, 2007
    Gemm,

    I know it is not Ferrari, but could you create an image of the Porsche crest in that size? Thanks
     
  9. Gemm

    Gemm Formula 3

    Aug 19, 2005
    1,163
    Essex, England
    #9 Gemm, Nov 11, 2007
    Last edited by a moderator: Sep 7, 2017
    I'll do it for you if I can find a good .EPS file. Does anybody know where I can get hold of one? I've found this one but I don't think it looks quite right. What do you think? There must be a better one available somewhere. ;)
    Image Unavailable, Please Login
     
  10. turbo9441

    turbo9441 Rookie

    Aug 20, 2006
    13
    Tennessee
    #10 turbo9441, Nov 11, 2007
    That one does not look correct. I appreciate your help!

     
  11. Gemm

    Gemm Formula 3

    Aug 19, 2005
    1,163
    Essex, England
    #11 Gemm, Nov 11, 2007
    Yep, that was exactly my thought. Hope I'll be able to find the correct file, then I'll do it for you. :)
     

Share This Page