How to remove shift knob on Diablo? | FerrariChat
Buy

How to remove shift knob on Diablo?

Discussion in 'LamborghiniChat.com' started by KENCO, Dec 5, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. KENCO

    KENCO Formula 3

    Nov 1, 2006
    2,396
    FL
    Full Name:
    KJG
    #1 KENCO, Dec 5, 2007
    How does it come off? I have to re-finish the gate plate underneath, so I nead to remove the shift knob, 92 Diablo.
     
  2. Scaledetails

    Scaledetails F1 Rookie

    Nov 19, 2003
    4,211
    Daytona Beach, FL
    Full Name:
    Stephane
    #2 Scaledetails, Dec 5, 2007
    It should unscrew counterclockwise
     
  3. KENCO

    KENCO Formula 3

    Nov 1, 2006
    2,396
    FL
    Full Name:
    KJG
    #3 KENCO, Dec 5, 2007
    I'll try, thanks!
     
  4. KENCO

    KENCO Formula 3

    Nov 1, 2006
    2,396
    FL
    Full Name:
    KJG
    #4 KENCO, Dec 5, 2007
    OK, will not unscrew counter clockwise.

    There is a collar at the bottom that unscrews from the shift knob and then the knob can be removed.
     
  5. Scaledetails

    Scaledetails F1 Rookie

    Nov 19, 2003
    4,211
    Daytona Beach, FL
    Full Name:
    Stephane
    #5 Scaledetails, Dec 5, 2007
    Sorry Ken, I was just going by memory on my 92', as my 91 currently has an aftermarket momo knob with the bottom collar. Glad you did figure it out.
     
  6. KENCO

    KENCO Formula 3

    Nov 1, 2006
    2,396
    FL
    Full Name:
    KJG
    #6 KENCO, Dec 6, 2007
    No problem, I think mine is aftermarket also, it is contoured, not just a ball or rounded.
     
  7. Arvin Grajau

    Arvin Grajau Seven Time F1 World Champ

    Jun 7, 2006
    78,325
    Wurundjeri man.
    Full Name:
    Arvin Grajau
    #7 Arvin Grajau, Dec 6, 2007
    eat it
     
  8. KENCO

    KENCO Formula 3

    Nov 1, 2006
    2,396
    FL
    Full Name:
    KJG
    #8 KENCO, Dec 6, 2007
    ?
     
  9. IceDemon

    IceDemon Rookie

    May 17, 2006
    30
    Lutz, FL
    #9 IceDemon, Dec 6, 2007
    Those shift knobs are hard and chewy, so I wouldn't advice this. It's better to lick it off. If it tastes bad, put some maple suryp on it or something.
     
  10. BULL RUN

    BULL RUN Formula 3

    Dec 18, 2004
    1,684
    #10 BULL RUN, Dec 9, 2007
    Look for two, maybe three small allen screws
     
  11. Pantera

    Pantera F1 Rookie

    Nov 6, 2004
    4,479
    #11 Pantera, Dec 9, 2007
    Those things are as hard as the Captain crunch cereal man! you trying to make him smash in his teeth or choke?.
     

Share This Page