Testarossa Brembo Install

So this is the start of numerous mods I'm doing on my 91 TR. This is just a mock up to see clearances, but right off I thing I need a spacer just to be on the safe side. While nothing is scrapping you can see that it is very close. With some flexure under load I can imagine a possibility where it might rub. So, I'm thinking a space like a 11mm. Any thoughts?
John
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Yes, these are the biggest available for a Testarossa.

John

 

Direct bolt on (except you might have to do a little custom fitting to get the hose through the bracket). These are big. I had the smaller Brembos on, but I wanted the big brakes front and rear. I got them from (http://www.raceshopper.com/). They had the best price I could find. I believe it was around $6300 for everything with free shipping. Comes with everything, including new goodridge stainless braided hoses.
John

 

It comes with rotors, calipers, mounts, hoses and fasteners. I would say you had to use the rotors supplied which are superior anyway. You can order them either with holes are vanes (like I ordered). I realize now that it looks like the rotors are solid, but they have vanes on the faces. The rotors float for alignment.
John

 

Brembo kits cost me $6200, no shipping costs, I did the install. The wheels and tires cost me $2200. I replaced the rear tires for $600. Now while I had everything off, I 'm replacing the cv joints, rear hub bearings, a-arm bushings, and the front wheel bearings.
John

 

Adam,
The cheapest price I was able to find was from (http://www.raceshopper.com/). They don't charge for shipping either.
John