Question for 355 fanatics | FerrariChat

Question for 355 fanatics

Discussion in '348/355' started by GatorFL, May 3, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. GatorFL

    GatorFL Moderator
    Moderator Owner

    Nov 18, 2005
    17,111
    Wellington, FL
    Full Name:
    Duane
    At what point did Ferrari "fix" the valve guide issue? By that I mean what year? '97? '98? 99?

    I believe the headers were weak throughout the whole production run, right?
     
  2. 355dreamer

    355dreamer F1 World Champ
    Owner

    Apr 3, 2006
    10,476
    DC Metro
    Full Name:
    L.C.
    Uggghhh
     
  3. Elliott

    Elliott Karting

    Jun 28, 2007
    141
    Bay Area
    Full Name:
    Elliott
    They fixed it in late 1999 with the 360.....
     
  4. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,984
    MD and NE
    Full Name:
    Robbie
    Duane---Honestly--This is the best answer!! Most cars, not all by mid 1998 were fitted with the steel ones, BUT there have been many late 1999 cars found with the bronze guides....
     
  5. Oengus

    Oengus F1 World Champ
    Rossa Subscribed Silver Subscribed

    Duane

    you can have them done for 1200 - 1500 when you have a major belt service done.
     
  6. GatorFL

    GatorFL Moderator
    Moderator Owner

    Nov 18, 2005
    17,111
    Wellington, FL
    Full Name:
    Duane
    ???!!!! I see majors/rebuilds done for $15K + due to new guides/headers. Headers I think I could live with but valves seems like it could get expensive. It is a shame really because the 355 looks so much better than 360/430......
     
  7. UConn Husky

    UConn Husky F1 Rookie
    Silver Subscribed

    Nov 11, 2006
    4,425
    CT
    Full Name:
    Jay
    +1, don't sweat it so much. Fix them during a major and you're set. There was just a 348 thread showing $26k in the first year of ownership (granted with many upgrades and improvements)...valve guides aren't that big of a deal.
     
  8. James-NZ

    James-NZ F1 Veteran

    Jun 26, 2007
    5,822
    Hamilton, NewZealand
    Full Name:
    James
    +1
     
  9. nizam

    nizam Formula 3
    Owner

    Jul 9, 2004
    1,563
    San Jose, CA
    Full Name:
    Ni Zam
    Indeed.

    I had the ones in my 1998 done after the problem was detected. Did the major along with refreshing the valves and guides, and have spent the last 5,000 miles squeezing all the horsepower out of it. No regrets.

    Alternately, find one that already has documentation of this work already done ...
     
  10. Oengus

    Oengus F1 World Champ
    Rossa Subscribed Silver Subscribed

    Duane

    what Im saying is that all fcars need majors at some point.
    When you do the major have the valves/valve guides done also........its only another 1.5k ish to the standard bill
     
  11. FullChat

    FullChat Formula Junior

    Jan 1, 2007
    339
    San Antonio, Texas
    There is a magic build number - I forgot what it is but something like 27670 - when they changed to steel valve guides late in the '98 year. Anyone remember the correct number?
     
  12. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,984
    MD and NE
    Full Name:
    Robbie
    #27689---Is the supposed number, but that is BS....
     
  13. GatorFL

    GatorFL Moderator
    Moderator Owner

    Nov 18, 2005
    17,111
    Wellington, FL
    Full Name:
    Duane
    Not that I'm shopping, I was just wondering. There was a beautiful black/tan 355 that apparantly had the valve issue and the owner was quoted like $20K for the work. Long story short, the car was sold without the repair and now it's for sale again. It seems a major should be no more than $9-10K for a 355, his quote was far more than that so I am curious as to why it would be so much more. Does this permanently resolve the issue or is that not known yet?

    Agreed all cars need rebuilds at some point but it is a shame this one is so fragile.
     
  14. mwhitesell

    mwhitesell Formula 3

    Sep 17, 2006
    1,083
    Atlanta
    Full Name:
    Mark

    Ferraris are not for everyone. If this is a big worry for a potential owner, then they should buy a Honda.
     
  15. ferraridriver

    ferraridriver F1 Rookie

    Aug 8, 2002
    4,152
    Bay Area Calif.
    Full Name:
    Dave
    How does that number equate to the last five numbers in the serial number?

    Where does one find the build number?
     
  16. FullChat

    FullChat Formula Junior

    Jan 1, 2007
    339
    San Antonio, Texas
  17. BT

    BT F1 World Champ
    Lifetime Rossa

    Mar 21, 2005
    15,291
    FL / GA
    Full Name:
    Bill Tracy
    True, but Duane has a 328. I can see where the questions come from. Lots of cars for sale quote "$15k on recent engine service", or more. Here people say they can be done for an additional $1.5k. So the story is, while you have the engine out for the timing belt service, it is not an expensive item to get done. The headers are best replaced by aftermarket units for a total of around $4-5k for both sides, although I recently saw some nice looking ones for around $3k for the set.
    Duane also has an Acura (which is mildly better than a Honda).
    :)
    BT
     
  18. Bullfighter

    Bullfighter Two Time F1 World Champ
    Lifetime Rossa Owner

    Jan 26, 2005
    22,622
    Gates Mills, Ohio
    Full Name:
    Jon
    True, the big maintenance cost in a 328 is replacing the air freshener. (Which can be done during a major if you want to save money.)
     
  19. BT

    BT F1 World Champ
    Lifetime Rossa

    Mar 21, 2005
    15,291
    FL / GA
    Full Name:
    Bill Tracy
    Yes, Duane was telling me of the $20 repair that prevented him from bringing his 328 to our party this past weekend. Although the repair is cheap, sometimes it is just as frustrating. ;)
    BT
     
  20. life@8500

    life@8500 Karting
    Silver Subscribed

    Feb 22, 2005
    233
    Milford,CT
    Full Name:
    C Ryan Ramotar
    once the cam covers are off how can i identify bronze guides? simply by color? I have no issues with my 1996 and have close to 18000 miles. thanks!
     
  21. GatorFL

    GatorFL Moderator
    Moderator Owner

    Nov 18, 2005
    17,111
    Wellington, FL
    Full Name:
    Duane
    Yeah the tow was triple the repair cost......

    I only asked the question because I would be interested in a 355 if the expections of owning one were reasonable. They are beautiful and nothing sounds alike. Even with an engine-out major, hard to justify the cost.

    Nobody answered my question regarding if the "fixes" are permanent. I'd like to believe they are for that kind of jingle.
     
  22. rllucero

    rllucero Formula Junior

    Jul 11, 2006
    559
    Santa Fe/San Diego
    Full Name:
    richontravel
    +1, no kiddidng, if you want to PLAY with Ferraris you have to PAY. Not to many automobiles can give you the satisfaction that ferrari ownership does. There is a huge price to pay for being in this game.

    If you are worried about 355 valve guide problems, cracked headers, C-pillar cracks, cat replacements, F1 pump, etc., etc., stay away from a 355 and buy a Honda 2000, you'll have lots of fun, worry alot less, your significant other will love you for it, and have plenty of cash left over.
     
  23. jetfixr

    jetfixr Formula 3

    Jun 14, 2007
    1,016
    northeast
    Full Name:
    Gone



    +111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111

    what he said
     
  24. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,984
    MD and NE
    Full Name:
    Robbie
    No correlation between the two numbers...
     
  25. BT

    BT F1 World Champ
    Lifetime Rossa

    Mar 21, 2005
    15,291
    FL / GA
    Full Name:
    Bill Tracy
    I think you may be a good candidate for the car I have on order. When it gets here and gets running, you will have to try it out. I expect it will be more performance than I can handle.
    And cheap parts to boot!
    :)
    BT
     

Share This Page