New Revell F2007 buildup

Well calling the Revell kit highly accurate is something that I wouldn't do after working on it for a bit. I haven't been working very fast with class and work taking up most of the summer but I was able to do some body work and rewrite the assembly instructions to hopefully make the car come out a bit better.

I ended up chopping the front suspension bits in half so that I could install the underside of the nose of the car and get rid of the huge gaps that would have been present if I assembled it the way the kit wanted it done. Those bits will be covered with the included CF decals on the arms and some SMS CF decals on the wheel hubs. Unfortunately the included CF decals don't cover the entire part of the arm just the top and bottom part of it which is a bit annoying but hopefully no one will be looking too incredibly closely at the sides of the arms and notice that it's just cleared over matte black since I don't want to waste more SMS CF sheets on them with my student budget.

At the rear of the car in every photo I see from 07' there is a fin on the back part that Revell has left off and this is my attempt to add a scratch built part to make up for it. It will be interesting to see how it looks once I spray some primer over it and it shows off all the flaws.

Hopefully this weekend I can get to the hobby store for some more paint and make some more progress on the model.
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Alright I need some opinions should I try and stick with the Monaco GP version of the car or should I just go for a generic version with wheel covers tobacco decals and the front fins?

 

Nope the Revell kit doesn't come with barcodes, but I bought a decal set off Ebay that comes with Marlboro and barcode decals.

 

That was one of the biggest things I was disappointed about. It has three different versions listed in the instructions none of with the kit is actually correct for.

 

I've ran out of primer need to go to the hobby store and get some more as well as order the clear red that I'm going to need.

 

A bit more slow progress, I've finished as much as I'd like on filling all the little bits on the body and have sprayed a few coats of primer on it which I'll let dry for a couple days. Also finished the under tray as well as the rear suspension bits. The engine isn't detailed at all since it won't ever be seen. Now I just have to convince myself to hunker down and get back to work on the 20 or so CF decals for the front suspension.
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

I'll see how it looks when it's finished if I want to take some sand paper to the tyres. The CF on the suspension arms are decals that came with the kit actually, the CF over the hubs is from SMS.

 

The store never sent my order for the clear red so I have tons of gold painted car parts that are waiting for clear red paint I'll try and get some pix up later tonight.

 

Alright still waiting on clear red from the hobby store to finish off all the body parts. Finished the cockpit and most of the other bits and now I have to pack it up to move.
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Alright as I've said before very slow progress but here's a teaser, finally got the clear red paint.
Image Unavailable, Please Login

 

Honestly the picture really doesn't do it justice, it's got a great sparkle that you an se through the clear red.

 

Here's another little teaser, there's a ton of decals on this one.
Image Unavailable, Please Login